liquid_vo0.8_TPU_Superdraft_Print.inst.cfg 1.9 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061
  1. [general]
  2. definition = liquid
  3. name = Sprint
  4. version = 4
  5. [metadata]
  6. material = generic_tpu
  7. quality_type = superdraft
  8. setting_version = 22
  9. type = quality
  10. variant = VO 0.8
  11. weight = -4
  12. [values]
  13. brim_width = 8.75
  14. cool_min_layer_time_fan_speed_max = 6
  15. infill_before_walls = True
  16. infill_line_width = =round(line_width * 0.7 / 0.8, 2)
  17. infill_pattern = cross_3d
  18. infill_sparse_density = 10
  19. jerk_prime_tower = =math.ceil(jerk_print * 25 / 15)
  20. jerk_support = =math.ceil(jerk_print * 25 / 15)
  21. jerk_travel = 20
  22. jerk_wall_0 = =math.ceil(jerk_wall * 15 / 15)
  23. machine_nozzle_cool_down_speed = 0.5
  24. machine_nozzle_heat_up_speed = 2.5
  25. material_final_print_temperature = =material_print_temperature
  26. material_flow = 105
  27. material_initial_print_temperature = =material_print_temperature
  28. material_print_temperature = =default_material_print_temperature + 2
  29. material_print_temperature_layer_0 = =material_print_temperature + 15
  30. material_standby_temperature = 100
  31. multiple_mesh_overlap = 0.2
  32. prime_tower_enable = True
  33. prime_tower_flow = 100
  34. retract_at_layer_change = False
  35. retraction_count_max = 12
  36. retraction_extra_prime_amount = 0.5
  37. retraction_hop = 1.5
  38. retraction_hop_only_when_collides = False
  39. retraction_min_travel = =line_width * 2
  40. retraction_prime_speed = 15
  41. skin_line_width = =round(line_width * 0.78 / 0.8, 2)
  42. speed_print = 30
  43. speed_topbottom = =math.ceil(speed_print * 20 / 30)
  44. speed_wall = =math.ceil(speed_print * 30 / 30)
  45. speed_wall_x = =math.ceil(speed_wall * 30 / 30)
  46. support_angle = 50
  47. support_bottom_distance = =support_z_distance
  48. support_line_width = =round(line_width * 0.7 / 0.8, 2)
  49. support_offset = =line_width
  50. switch_extruder_prime_speed = 15
  51. switch_extruder_retraction_amount = 20
  52. switch_extruder_retraction_speeds = 45
  53. top_bottom_thickness = 1.2
  54. top_skin_expand_distance = =line_width * 2
  55. travel_avoid_distance = 1.5
  56. wall_0_wipe_dist = =line_width * 2
  57. wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
  58. wall_thickness = 1.3