flsun_v400_normal.inst.cfg 3.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125
  1. [general]
  2. definition = flsun_v400
  3. name = Normal
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. weight = -2
  11. [values]
  12. acceleration_enabled = True
  13. acceleration_print = 8000.0
  14. acceleration_topbottom = 6000.0
  15. acceleration_travel = 8000.0
  16. acceleration_wall = 5000.0
  17. adhesion_type = brim
  18. bridge_enable_more_layers = False
  19. bridge_settings_enabled = True
  20. bridge_skin_material_flow = 60
  21. bridge_skin_speed = 60
  22. bridge_skin_support_threshold = 50
  23. bridge_wall_material_flow = 100.0
  24. bridge_wall_speed = 60
  25. brim_width = 6.6
  26. cool_fan_full_at_height = 0.6
  27. cool_fan_speed = 100
  28. cool_lift_head = False
  29. cool_min_layer_time = 5
  30. expand_skins_expand_distance = 0.8
  31. fill_outline_gaps = False
  32. infill_before_walls = False
  33. infill_enable_travel_optimization = False
  34. infill_pattern = grid
  35. infill_sparse_density = 10.0
  36. infill_support_angle = 50
  37. inset_direction = inside_out
  38. ironing_enabled = False
  39. ironing_only_highest_layer = True
  40. jerk_enabled = True
  41. jerk_infill = 100.0
  42. jerk_layer_0 = 10.0
  43. jerk_print = 10.0
  44. jerk_roofing = 10.0
  45. jerk_support_interface = 10.0
  46. jerk_topbottom = 10.0
  47. jerk_travel = 100.0
  48. jerk_wall = 10.0
  49. jerk_wall_0 = 5.0
  50. layer_height = 0.2
  51. layer_height_0 = 0.3
  52. line_width = 0.44
  53. material_bed_temperature = 60
  54. material_bed_temperature_layer_0 = 60
  55. material_final_print_temperature = 210
  56. material_initial_print_temperature = 210
  57. material_print_temperature = 210
  58. material_print_temperature_layer_0 = 210
  59. max_skin_angle_for_expansion = 90
  60. minimum_interface_area = 2.0
  61. minimum_support_area = 2.0
  62. optimize_wall_printing_order = True
  63. raft_speed = 75.0
  64. retract_at_layer_change = False
  65. retraction_amount = 0.6
  66. retraction_combing = noskin
  67. retraction_combing_max_distance = 10
  68. retraction_hop = 0.3
  69. retraction_hop_enabled = True
  70. retraction_hop_only_when_collides = False
  71. retraction_speed = 40
  72. roofing_layer_count = 1
  73. skin_monotonic = True
  74. skin_no_small_gaps_heuristic = False
  75. skin_overlap = 10
  76. skin_preshrink = 0.8
  77. skirt_line_count = 2
  78. small_feature_speed_factor = 60.0
  79. small_hole_max_size = 5.0
  80. speed_infill = 350.0
  81. speed_layer_0 = 25
  82. speed_print = 400.0
  83. speed_roofing = 120.0
  84. speed_support = 350
  85. speed_support_interface = 100
  86. speed_topbottom = 120.0
  87. speed_travel = 400.0
  88. speed_travel_layer_0 = 50.0
  89. speed_wall = 120.0
  90. speed_wall_x = 280.0
  91. speed_z_hop = 50.0
  92. support_angle = 65
  93. support_brim_enable = True
  94. support_brim_width = 8.8
  95. support_enable = False
  96. support_infill_rate = 10
  97. support_interface_density = 70
  98. support_interface_enable = True
  99. support_interface_height = 0.6
  100. support_interface_pattern = lines
  101. support_interface_skip_height = 0.2
  102. support_pattern = zigzag
  103. support_roof_density = 70
  104. support_type = everywhere
  105. support_use_towers = False
  106. support_wall_count = 1
  107. support_xy_distance = 0.5
  108. support_xy_overrides_z = xy_overrides_z
  109. support_z_distance = 0.2
  110. top_bottom_thickness = 0.6
  111. top_layers = =0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))
  112. top_thickness = 1
  113. travel_avoid_other_parts = True
  114. travel_avoid_supports = True
  115. travel_retract_before_outer_wall = False
  116. wall_overhang_angle = 35.0
  117. wall_overhang_speed_factor = 60.0
  118. wall_thickness = =line_width*2
  119. z_seam_corner = z_seam_corner_inner
  120. z_seam_position = backright
  121. z_seam_type = sharpest_corner
  122. zig_zaggify_infill = True