cartesio_0.8_hips_normal.inst.cfg 1.4 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647
  1. [general]
  2. definition = cartesio
  3. name = Normal
  4. version = 4
  5. [metadata]
  6. material = generic_hips
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. variant = 0.8mm thermoplastic extruder
  11. weight = 0
  12. [values]
  13. coasting_enable = True
  14. coasting_min_volume = 0.17
  15. coasting_speed = 90
  16. coasting_volume = 0.1
  17. cool_min_layer_time = 20
  18. cool_min_layer_time_fan_speed_max = =cool_min_layer_time
  19. infill_line_width = 0.9
  20. infill_pattern = grid
  21. infill_sparse_density = 40
  22. material_final_print_temperature = =material_print_temperature
  23. material_initial_print_temperature = =material_print_temperature_layer_0 + 5
  24. material_print_temperature_layer_0 = =material_print_temperature + 5
  25. retraction_hop = 1
  26. retraction_hop_enabled = True
  27. retraction_min_travel = =round(line_width * 10)
  28. retraction_prime_speed = 10
  29. skirt_brim_minimal_length = 50
  30. speed_infill = =speed_print
  31. speed_layer_0 = =round(speed_print / 5 * 4)
  32. speed_print = 50
  33. speed_support_interface = =speed_topbottom
  34. speed_topbottom = =round(speed_print / 5 * 4)
  35. speed_travel = =round(speed_print if magic_spiralize else 150)
  36. speed_travel_layer_0 = =speed_travel
  37. speed_wall = =round(speed_print / 2)
  38. speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
  39. switch_extruder_prime_speed = =retraction_prime_speed
  40. switch_extruder_retraction_amount = 2
  41. switch_extruder_retraction_speeds = =retraction_speed
  42. top_bottom_thickness = 0.8
  43. wall_0_inset = -0.05
  44. wall_thickness = 2.4