strateo3d.def.json 12 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279
  1. {
  2. "version": 2,
  3. "name": "DUAL600",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "eMotionTech",
  9. "manufacturer": "eMotionTech",
  10. "file_formats": "text/x-gcode",
  11. "has_machine_quality": true,
  12. "has_materials": true,
  13. "has_variants": true,
  14. "machine_extruder_trains":
  15. {
  16. "0": "strateo3d_right_extruder",
  17. "1": "strateo3d_left_extruder"
  18. },
  19. "preferred_material": "emotiontech_pla",
  20. "preferred_quality_type": "c",
  21. "preferred_variant_name": "Standard 0.6",
  22. "variants_name": "Print Head"
  23. },
  24. "overrides":
  25. {
  26. "acceleration_infill": { "maximum_value_warning": "1500" },
  27. "acceleration_layer_0":
  28. {
  29. "maximum_value_warning": "1500",
  30. "value": "acceleration_topbottom"
  31. },
  32. "acceleration_prime_tower": { "maximum_value_warning": "1500" },
  33. "acceleration_print":
  34. {
  35. "maximum_value_warning": "1500",
  36. "value": "machine_acceleration"
  37. },
  38. "acceleration_print_layer_0": { "maximum_value_warning": "1500" },
  39. "acceleration_skirt_brim": { "maximum_value_warning": "1500" },
  40. "acceleration_support": { "maximum_value_warning": "1500" },
  41. "acceleration_support_bottom": { "maximum_value_warning": "1500" },
  42. "acceleration_support_infill": { "maximum_value_warning": "1500" },
  43. "acceleration_support_interface":
  44. {
  45. "maximum_value_warning": "1500",
  46. "value": "acceleration_topbottom"
  47. },
  48. "acceleration_support_roof": { "maximum_value_warning": "1500" },
  49. "acceleration_topbottom":
  50. {
  51. "maximum_value_warning": "1500",
  52. "value": "math.ceil(acceleration_print * 1250 / acceleration_print)"
  53. },
  54. "acceleration_travel":
  55. {
  56. "maximum_value_warning": "1500",
  57. "value": "acceleration_print"
  58. },
  59. "acceleration_travel_layer_0": { "maximum_value_warning": "1500" },
  60. "acceleration_wall":
  61. {
  62. "maximum_value_warning": "1500",
  63. "value": "math.ceil(acceleration_print * 1250 / acceleration_print)"
  64. },
  65. "acceleration_wall_0":
  66. {
  67. "maximum_value_warning": "1500",
  68. "value": "math.ceil(acceleration_print * 1000 / acceleration_print)"
  69. },
  70. "acceleration_wall_x": { "maximum_value_warning": "1500" },
  71. "adaptive_layer_height_variation_step": { "default_value": 0.05 },
  72. "adhesion_type": { "default_value": "skirt" },
  73. "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))" },
  74. "bottom_thickness": { "value": "top_bottom_thickness-2 * layer_height+layer_height_0" },
  75. "default_material_print_temperature":
  76. {
  77. "maximum_value": "415",
  78. "maximum_value_warning": "400"
  79. },
  80. "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" },
  81. "extruder_prime_pos_abs": { "default_value": true },
  82. "extruder_prime_pos_x":
  83. {
  84. "maximum_value": "machine_width",
  85. "minimum_value": "0"
  86. },
  87. "extruder_prime_pos_y":
  88. {
  89. "maximum_value": "machine_depth",
  90. "minimum_value": "0"
  91. },
  92. "gantry_height": { "value": "40" },
  93. "gradual_infill_step_height": { "value": "layer_height * 10" },
  94. "gradual_support_infill_step_height": { "value": "layer_height * 7" },
  95. "infill_before_walls": { "default_value": false },
  96. "infill_overlap": { "value": "0" },
  97. "infill_wipe_dist": { "value": "0" },
  98. "jerk_enabled":
  99. {
  100. "maximum_value_warning": "0.01",
  101. "value": "False"
  102. },
  103. "jerk_infill":
  104. {
  105. "maximum_value_warning": "0.01",
  106. "value": "0.01"
  107. },
  108. "jerk_layer_0":
  109. {
  110. "maximum_value_warning": "0.01",
  111. "value": "jerk_topbottom"
  112. },
  113. "jerk_prime_tower":
  114. {
  115. "maximum_value_warning": "0.01",
  116. "value": "jerk_print * 15 / 25"
  117. },
  118. "jerk_print":
  119. {
  120. "maximum_value_warning": "0.01",
  121. "value": "0.01"
  122. },
  123. "jerk_print_layer_0": { "maximum_value_warning": "0.01" },
  124. "jerk_skirt_brim": { "maximum_value_warning": "0.01" },
  125. "jerk_support":
  126. {
  127. "maximum_value_warning": "0.01",
  128. "value": "jerk_print * 15 / 25"
  129. },
  130. "jerk_support_bottom": { "maximum_value_warning": "0.01" },
  131. "jerk_support_infill": { "maximum_value_warning": "0.01" },
  132. "jerk_support_interface":
  133. {
  134. "maximum_value_warning": "0.01",
  135. "value": "jerk_topbottom"
  136. },
  137. "jerk_support_roof": { "maximum_value_warning": "0.01" },
  138. "jerk_topbottom":
  139. {
  140. "maximum_value_warning": "0.01",
  141. "value": "jerk_print * 5 / 25"
  142. },
  143. "jerk_travel":
  144. {
  145. "maximum_value_warning": "0.01",
  146. "value": "machine_max_jerk_xy"
  147. },
  148. "jerk_travel_layer_0": { "maximum_value_warning": "0.01" },
  149. "jerk_wall":
  150. {
  151. "maximum_value_warning": "0.01",
  152. "value": "jerk_print * 5 / 25"
  153. },
  154. "jerk_wall_0":
  155. {
  156. "maximum_value_warning": "0.01",
  157. "value": "jerk_wall * 5 / 10"
  158. },
  159. "jerk_wall_x": { "maximum_value_warning": "0.01" },
  160. "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
  161. "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
  162. "machine_acceleration": { "default_value": 1500 },
  163. "machine_center_is_zero": { "default_value": false },
  164. "machine_depth": { "default_value": 420 },
  165. "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 z1 \nG90 \nG28 \nM801.0 \nM84 \nM192" },
  166. "machine_extruder_count": { "default_value": 2 },
  167. "machine_gcode_flavor": { "default_value": "Marlin" },
  168. "machine_head_with_fans_polygon":
  169. {
  170. "default_value": [
  171. [-76, -51.8],
  172. [25, -51.8],
  173. [25, 38.2],
  174. [-76, 38.2]
  175. ]
  176. },
  177. "machine_heat_zone_length": { "default_value": 7 },
  178. "machine_heated_bed": { "default_value": true },
  179. "machine_heated_build_volume": { "default_value": true },
  180. "machine_height": { "default_value": 495 },
  181. "machine_max_jerk_xy": { "default_value": 0.01 },
  182. "machine_max_jerk_z": { "default_value": 0 },
  183. "machine_min_cool_heat_time_window": { "value": "15" },
  184. "machine_name": { "default_value": "DUAL600" },
  185. "machine_nozzle_cool_down_speed": { "default_value": 0.5 },
  186. "machine_nozzle_heat_up_speed": { "default_value": 2.25 },
  187. "machine_start_gcode": { "default_value": ";M104 T0 S{material_standby_temperature, 0} \n;M104 T1 S{material_standby_temperature, 1} \n;M140 S{material_bed_temperature_layer_0} \n;M141 S{build_volume_temperature} \nG28 \nG90 \nG1 X0 Y0 Z15 F6000 \n;M190 S{material_bed_temperature_layer_0} \n;M109 S{material_print_temperature_layer_0, initial_extruder_nr} \nG1 Z0.3 \nG92 E0 \nG1 F300 X45 E18 \n;G1 F1500 E17 \nG1 F600 X25 \nG1 F600 Z3" },
  188. "machine_width": { "default_value": 600 },
  189. "material_bed_temperature":
  190. {
  191. "maximum_value": "140",
  192. "maximum_value_warning": "140"
  193. },
  194. "material_bed_temperature_layer_0":
  195. {
  196. "maximum_value": "140",
  197. "maximum_value_warning": "140"
  198. },
  199. "material_final_print_temperature":
  200. {
  201. "maximum_value": "415",
  202. "maximum_value_warning": "400"
  203. },
  204. "material_flow": { "default_value": 93 },
  205. "material_flow_layer_0": { "value": "math.ceil(material_flow * 1)" },
  206. "material_initial_print_temperature":
  207. {
  208. "maximum_value": "415",
  209. "maximum_value_warning": "400"
  210. },
  211. "material_print_temperature":
  212. {
  213. "maximum_value": "415",
  214. "maximum_value_warning": "400"
  215. },
  216. "material_print_temperature_layer_0":
  217. {
  218. "maximum_value": "415",
  219. "maximum_value_warning": "400"
  220. },
  221. "material_standby_temperature":
  222. {
  223. "maximum_value": "material_print_temperature",
  224. "maximum_value_warning": "material_print_temperature - 40"
  225. },
  226. "meshfix_maximum_deviation": { "default_value": 0.04 },
  227. "optimize_wall_printing_order": { "value": "True" },
  228. "prime_tower_min_volume": { "default_value": 35 },
  229. "prime_tower_position_x": { "value": "machine_width/2 + prime_tower_size/2" },
  230. "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
  231. "retraction_amount": { "default_value": 1.5 },
  232. "retraction_combing_max_distance": { "default_value": 5 },
  233. "retraction_count_max": { "default_value": 15 },
  234. "retraction_hop": { "value": "2" },
  235. "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
  236. "retraction_hop_only_when_collides": { "value": "True" },
  237. "retraction_min_travel": { "value": "3 * line_width" },
  238. "retraction_prime_speed": { "value": "retraction_speed-10" },
  239. "skin_overlap": { "value": "10" },
  240. "skirt_brim_minimal_length": { "default_value": 333 },
  241. "speed_layer_0": { "value": "20" },
  242. "speed_prime_tower": { "value": "speed_topbottom" },
  243. "speed_print": { "value": "50" },
  244. "speed_support": { "value": "speed_wall" },
  245. "speed_support_interface": { "value": "speed_topbottom" },
  246. "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" },
  247. "speed_travel": { "value": "150" },
  248. "speed_travel_layer_0": { "value": "100" },
  249. "speed_wall": { "value": "math.ceil(speed_print * 3/4)" },
  250. "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" },
  251. "speed_wall_x": { "value": "speed_wall" },
  252. "support_bottom_distance":
  253. {
  254. "maximum_value_warning": "machine_nozzle_size * 1.5",
  255. "value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance')"
  256. },
  257. "support_interface_enable": { "default_value": true },
  258. "support_interface_height": { "value": "layer_height * 3" },
  259. "support_interface_offset": { "value": "support_offset" },
  260. "support_top_distance": { "maximum_value_warning": "machine_nozzle_size * 1.5" },
  261. "support_xy_distance": { "value": "line_width * 1.7" },
  262. "support_xy_distance_overhang": { "value": "wall_line_width_0" },
  263. "support_z_distance":
  264. {
  265. "maximum_value_warning": "machine_nozzle_size * 1.5",
  266. "value": "layer_height*2"
  267. },
  268. "switch_extruder_prime_speed": { "value": "retraction_prime_speed" },
  269. "switch_extruder_retraction_amount": { "value": "7" },
  270. "switch_extruder_retraction_speeds": { "value": "retraction_retract_speed" },
  271. "top_bottom_thickness":
  272. {
  273. "minimum_value_warning": "layer_height * 2",
  274. "value": "3 * layer_height"
  275. },
  276. "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
  277. "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }
  278. }
  279. }