Cura/resources/definitions/rigid3d_base.def.json

{
    "version": 2,
    "name": "Rigid3D Base Printer",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": false,
        "author": "Mehmet SUTA\u015e",
        "manufacturer": "Rigid3D",
        "file_formats": "text/x-gcode",
        "first_start_actions": [ "MachineSettingsAction" ],
        "has_machine_quality": true,
        "has_materials": true,
        "machine_extruder_trains": { "0": "rigid3d_base_extruder_0" },
        "preferred_material": "generic_pla_175",
        "supported_actions": [ "MachineSettingsAction" ]
    },
    "overrides":
    {
        "acceleration_enabled": { "value": "False" },
        "acceleration_print": { "value": 600 },
        "acceleration_travel": { "value": 600 },
        "adaptive_layer_height_variation": { "value": 0.16 },
        "adaptive_layer_height_variation_step": { "value": 0.04 },
        "adhesion_type": { "value": "'skirt'" },
        "expand_skins_expand_distance": { "value": 0.3 },
        "infill_pattern": { "value": "'zigzag'" },
        "infill_sparse_density": { "value": 10 },
        "inset_direction": { "value": "'outside_in'" },
        "jerk_enabled": { "value": "False" },
        "jerk_print": { "value": 10 },
        "jerk_travel": { "value": "jerk_print" },
        "jerk_travel_layer_0": { "value": "jerk_travel" },
        "machine_acceleration": { "value": 600 },
        "machine_max_acceleration_e": { "value": 1000 },
        "machine_max_acceleration_x": { "value": 600 },
        "machine_max_acceleration_y": { "value": 600 },
        "machine_max_acceleration_z": { "value": 300 },
        "machine_max_feedrate_e": { "value": 40 },
        "machine_max_feedrate_x": { "value": 100 },
        "machine_max_feedrate_y": { "value": 100 },
        "machine_max_feedrate_z": { "value": 8 },
        "machine_max_jerk_xy": { "value": 10.0 },
        "machine_max_jerk_z": { "value": 0.3 },
        "machine_name": { "default_value": "Rigid3D Base Printer" },
        "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
        "material_diameter": { "default_value": 1.75 },
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "minimum_interface_area": { "value": 5.0 },
        "minimum_support_area": { "value": 5 },
        "optimize_wall_printing_order": { "value": "True" },
        "retraction_amount": { "value": 1.5 },
        "retraction_combing": { "value": "'all'" },
        "retraction_combing_max_distance": { "value": 30 },
        "skin_monotonic": { "value": "True" },
        "skirt_gap": { "value": 5.0 },
        "skirt_line_count": { "value": 2 },
        "speed_support_interface": { "value": "speed_support" },
        "speed_topbottom": { "value": "speed_print" },
        "speed_travel": { "value": 80.0 },
        "speed_z_hop": { "default_value": 8.0 },
        "support_bottom_stair_step_height": { "value": 0.4 },
        "support_brim_enable": { "value": "True" },
        "support_brim_width": { "value": 4 },
        "support_infill_rate": { "value": 20 },
        "support_interface_density": { "value": 70 },
        "support_interface_enable": { "value": true },
        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
        "top_bottom_pattern": { "value": "'zigzag'" },
        "top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
        "travel_retract_before_outer_wall": { "value": "True" },
        "wall_thickness": { "value": "line_width * 2" },
        "xy_offset_layer_0": { "value": -0.2 },
        "z_seam_position": { "value": "'backleft'" },
        "z_seam_type": { "value": "'back'" }
    }
}