Cura/resources/definitions/eryone_er20.def.json

{
    "version": 2,
    "name": "Eryone ER20",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Eryone3d",
        "manufacturer": "Eryone",
        "file_formats": "text/x-gcode",
        "platform": "eryone_er20_plateform.stl",
        "has_machine_quality": true,
        "machine_extruder_trains": { "0": "eryone_er20_extruder_0" },
        "preferred_quality_type": "high"
    },
    "overrides":
    {
        "acceleration_enabled": { "value": true },
        "acceleration_travel": { "value": 1800 },
        "adhesion_type": { "value": "'brim'" },
        "bottom_layers": { "value": "4" },
        "bottom_thickness": { "value": "layer_height * 4" },
        "brim_width": { "value": 5 },
        "cool_fan_full_at_height": { "value": 0.5 },
        "cool_fan_speed": { "value": 100 },
        "cool_fan_speed_0": { "value": 100 },
        "default_material_bed_temperature": { "value": 60 },
        "default_material_print_temperature": { "value": 205 },
        "gantry_height": { "value": "0" },
        "infill_before_walls": { "value": false },
        "infill_overlap":
        {
            "maximum_value_warning": 100,
            "minimum_value_warning": -50,
            "value": "25 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0"
        },
        "infill_pattern": { "value": "'grid'" },
        "infill_sparse_density": { "value": 20 },
        "initial_layer_line_width_factor": { "value": 105 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 220 },
        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X230 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-10, -10],
                [-10, 10],
                [10, 10],
                [10, -10]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 200 },
        "machine_name": { "default_value": "Eryone ER20" },
        "machine_start_gcode": { "default_value": "G21 ;Metric values\nG90 ;Absolute positioning\nM82 ;Set extruder to absolute mode\nM107 ;Start with the fan off\nG28 ;Homing the hotend\nG29 ;Auto bed leveling detecting\nG92 E0 ;Reset the extruded length\nG1 F200 E3 ;Extrude 3mm of filament\nG92 E0 ;Reset the extruded length again\nG1 Y-3 F1200 ;Move y axis to prime\nG1 X150 F6000 ;Move x axis to prime\nG1 Z0.2 F720 ;Move z axis to prime\nG1 X80.0 E8.0 F900 ;Prime line\nG1 X20.0 E10.0 F700 ;Prime line\nG92 E0 ;Reset the extruded length\nG5 ;Enable resume from power failure\nM117 Printing...\n" },
        "machine_width": { "default_value": 250 },
        "material_bed_temperature_layer_0": { "value": 65 },
        "material_final_print_temperature": { "value": 205 },
        "material_initial_print_temperature": { "value": 205 },
        "material_print_temperature_layer_0": { "value": 215 },
        "optimize_wall_printing_order": { "default_value": true },
        "retract_at_layer_change": { "value": true },
        "retraction_amount": { "default_value": 4 },
        "retraction_combing": { "value": "'noskin'" },
        "retraction_hop": { "value": 0.075 },
        "retraction_hop_enabled": { "value": false },
        "retraction_hop_only_when_collides": { "value": true },
        "retraction_min_travel": { "value": 1.5 },
        "retraction_prime_speed":
        {
            "maximum_value_warning": 130,
            "value": "math.ceil(retraction_speed * 0.4)"
        },
        "retraction_retract_speed": { "maximum_value_warning": 130 },
        "retraction_speed":
        {
            "default_value": 85,
            "maximum_value_warning": 100
        },
        "skin_overlap": { "value": 10 },
        "skirt_brim_speed": { "value": 40 },
        "skirt_gap": { "value": 5 },
        "skirt_line_count": { "value": 3 },
        "smooth_spiralized_contours": { "value": false },
        "speed_layer_0": { "value": "20" },
        "speed_topbottom": { "value": "math.ceil(speed_print * 20 / 50)" },
        "speed_travel": { "value": "150" },
        "speed_wall": { "value": "speed_print" },
        "speed_wall_0": { "value": "math.ceil(speed_print * 30 / 50)" },
        "speed_wall_x": { "value": "speed_print" },
        "support_angle": { "value": 50 },
        "support_enable": { "default_value": false },
        "support_interface_enable": { "value": true },
        "support_pattern": { "value": "'triangles'" },
        "support_roof_enable": { "value": true },
        "support_type": { "value": "'everywhere'" },
        "support_use_towers": { "value": false },
        "support_xy_distance": { "value": 0.7 },
        "support_xy_distance_overhang": { "value": 0.2 },
        "support_z_distance": { "value": 0.3 },
        "top_layers": { "value": "5" },
        "top_thickness": { "value": "layer_height * 5" },
        "travel_retract_before_outer_wall": { "value": true },
        "wall_line_count": { "value": 3 },
        "wall_thickness": { "value": "1.2" },
        "z_seam_corner": { "value": "'z_seam_corner_inner'" },
        "z_seam_type": { "value": "'shortest'" }
    }
}