artillery_base.def.json 7.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131
  1. {
  2. "version": 2,
  3. "name": "Artillery Base Printer",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": false,
  8. "author": "3D-Nexus.com, cataclism, Wondro",
  9. "manufacturer": "Artillery",
  10. "file_formats": "text/x-gcode",
  11. "exclude_materials": [
  12. "dsm_arnitel2045_175",
  13. "dsm_novamid1070_175",
  14. "innofill_innoflex60_175",
  15. "verbatim_bvoh_175"
  16. ],
  17. "first_start_actions": [ "MachineSettingsAction" ],
  18. "has_machine_quality": true,
  19. "has_materials": true,
  20. "has_variants": true,
  21. "machine_extruder_trains": { "0": "artillery_base_extruder_0" },
  22. "preferred_material": "generic_pla",
  23. "preferred_quality_type": "standard",
  24. "preferred_variant_name": "0.4mm Nozzle",
  25. "variants_name": "Nozzle Size"
  26. },
  27. "overrides":
  28. {
  29. "acceleration_enabled": { "value": false },
  30. "acceleration_print": { "value": 500 },
  31. "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
  32. "acceleration_travel": { "value": 500 },
  33. "acceleration_travel_layer_0": { "value": "acceleration_travel" },
  34. "adaptive_layer_height_variation": { "value": 0.04 },
  35. "adaptive_layer_height_variation_step": { "value": 0.04 },
  36. "adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
  37. "brim_replaces_support": { "value": false },
  38. "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
  39. "cool_min_layer_time": { "value": 10 },
  40. "fill_outline_gaps": { "value": false },
  41. "infill_before_walls": { "value": false },
  42. "infill_overlap": { "value": 30.0 },
  43. "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
  44. "infill_wipe_dist": { "value": 0.0 },
  45. "jerk_enabled": { "value": false },
  46. "jerk_print": { "value": 8 },
  47. "jerk_travel": { "value": "jerk_print" },
  48. "jerk_travel_layer_0": { "value": "jerk_travel" },
  49. "line_width": { "value": "machine_nozzle_size * 1.1" },
  50. "machine_acceleration": { "value": 500 },
  51. "machine_end_gcode": { "default_value": "G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y200 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y300 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan" },
  52. "machine_heated_bed": { "default_value": true },
  53. "machine_max_acceleration_e": { "value": 5000 },
  54. "machine_max_acceleration_x": { "value": 500 },
  55. "machine_max_acceleration_y": { "value": 500 },
  56. "machine_max_acceleration_z": { "value": 100 },
  57. "machine_max_feedrate_e": { "value": 50 },
  58. "machine_max_feedrate_x": { "value": 500 },
  59. "machine_max_feedrate_y": { "value": 500 },
  60. "machine_max_feedrate_z": { "value": 10 },
  61. "machine_max_jerk_e": { "value": 5 },
  62. "machine_max_jerk_xy": { "value": 10 },
  63. "machine_max_jerk_z": { "value": 0.4 },
  64. "machine_name": { "default_value": "Artillery Base Printer" },
  65. "machine_start_gcode": { "default_value": "G28 ; home all axes\n M117 Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface" },
  66. "material_diameter": { "default_value": 1.75 },
  67. "material_final_print_temperature": { "value": "material_print_temperature" },
  68. "material_initial_print_temperature": { "value": "material_print_temperature" },
  69. "meshfix_maximum_resolution": { "value": "0.25" },
  70. "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
  71. "minimum_interface_area": { "value": 10 },
  72. "minimum_support_area": { "value": "2 if support_structure == 'normal' else 0" },
  73. "optimize_wall_printing_order": { "value": true },
  74. "retraction_amount": { "value": 2 },
  75. "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'infill'" },
  76. "retraction_combing_max_distance": { "value": 30 },
  77. "retraction_count_max": { "value": 100 },
  78. "retraction_extrusion_window": { "value": 10 },
  79. "retraction_hop": { "value": 0.2 },
  80. "retraction_hop_enabled": { "value": "support_enable" },
  81. "retraction_min_travel": { "value": 1.5 },
  82. "retraction_prime_speed":
  83. {
  84. "maximum_value": 200,
  85. "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
  86. },
  87. "retraction_retract_speed":
  88. {
  89. "maximum_value": 200,
  90. "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
  91. },
  92. "retraction_speed":
  93. {
  94. "maximum_value": 200,
  95. "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
  96. },
  97. "skin_overlap": { "value": 10.0 },
  98. "skirt_gap": { "value": 10.0 },
  99. "skirt_line_count": { "value": 4 },
  100. "speed_layer_0": { "value": 20.0 },
  101. "speed_prime_tower": { "value": "speed_topbottom" },
  102. "speed_print": { "value": 60.0 },
  103. "speed_support": { "value": "speed_wall_0" },
  104. "speed_support_interface": { "value": "speed_topbottom" },
  105. "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
  106. "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
  107. "speed_wall_x": { "value": "speed_wall" },
  108. "speed_z_hop": { "value": 5 },
  109. "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 / layer_height)))" },
  110. "support_brim_enable": { "value": true },
  111. "support_brim_width": { "value": 4 },
  112. "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
  113. "support_interface_density": { "value": 33.333 },
  114. "support_interface_enable": { "value": true },
  115. "support_interface_height": { "value": "layer_height * 4" },
  116. "support_interface_pattern": { "value": "'grid'" },
  117. "support_interface_skip_height": { "value": 0.2 },
  118. "support_xy_distance": { "value": "wall_line_width_0 * 2" },
  119. "support_xy_distance_overhang": { "value": "wall_line_width_0" },
  120. "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
  121. "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
  122. "top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
  123. "travel_avoid_other_parts": { "value": true },
  124. "travel_avoid_supports": { "value": true },
  125. "travel_retract_before_outer_wall": { "value": true },
  126. "wall_0_wipe_dist": { "value": 0.0 },
  127. "wall_thickness": { "value": "line_width * 2" },
  128. "z_seam_corner": { "value": "'z_seam_corner_none'" },
  129. "z_seam_type": { "value": "'back'" }
  130. }
  131. }