| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778 |
- [general]
- definition = ultimaker_s3
- name = Extra Fast - Experimental
- version = 4
- [metadata]
- is_experimental = True
- material = ultimaker_pla
- quality_type = verydraft
- setting_version = 22
- type = quality
- variant = AA 0.4
- weight = -3
- [values]
- _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
- _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
- _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
- acceleration_infill = =acceleration_print
- acceleration_ironing = 1000
- acceleration_layer_0 = =acceleration_wall_0
- acceleration_print = 3500
- acceleration_roofing = =acceleration_wall_0
- acceleration_topbottom = =acceleration_wall
- acceleration_wall = =acceleration_infill
- acceleration_wall_0 = 1500
- acceleration_wall_x = =acceleration_wall
- bridge_skin_speed = =bridge_wall_speed
- bridge_sparse_infill_max_density = 50
- bridge_wall_speed = 30
- cool_min_layer_time = 6
- infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
- infill_sparse_density = 15
- jerk_infill = =jerk_print
- jerk_layer_0 = =jerk_wall_0
- jerk_print = =max(30, speed_print/2)
- jerk_roofing = =jerk_wall_0
- jerk_topbottom = =jerk_wall
- jerk_wall = =jerk_infill
- jerk_wall_0 = =max(30, speed_wall_0/2)
- machine_nozzle_cool_down_speed = 1,3
- machine_nozzle_heat_up_speed = 1,9
- material_extrusion_cool_down_speed = 0,7
- material_max_flowrate = 12
- material_print_temperature = =default_material_print_temperature + 10
- meshfix_maximum_resolution = 0.7
- optimize_wall_printing_order = False
- prime_tower_enable = False
- raft_airgap = 0.25
- retraction_amount = 4
- retraction_prime_speed = =retraction_speed
- retraction_speed = 45
- skin_no_small_gaps_heuristic = True
- small_skin_on_surface = False
- small_skin_width = 4
- speed_infill = =speed_print
- speed_ironing = 20
- speed_layer_0 = =speed_roofing
- speed_prime_tower = =speed_wall_0
- speed_print = 100
- speed_roofing = =math.ceil(speed_wall*(45/100))
- speed_support_interface = =speed_wall_0
- speed_topbottom = =speed_print
- speed_wall = =speed_infill
- speed_wall_0 = =math.ceil(speed_wall*(35/100))
- speed_wall_x = =speed_wall
- support_bottom_distance = =support_z_distance
- support_interface_enable = True
- support_structure = tree
- support_top_distance = =support_z_distance
- support_z_distance = =math.ceil(0.3/layer_height)*layer_height
- top_bottom_thickness = =max(1 , layer_height * 5)
- wall_0_wipe_dist = 0.8
- wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
- z_seam_relative = True
- z_seam_type = back
- zig_zaggify_infill = True
|
