z-bolt_classic.def.json 2.0 KB

12345678910111213141516171819202122232425262728293031323334353637
  1. {
  2. "version": 2,
  3. "name": "Z-Bolt Classic",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Z-Bolt",
  9. "manufacturer": "Z-Bolt Co.",
  10. "file_formats": "text/x-gcode",
  11. "platform": "z-bolt_classic_platform.3mf",
  12. "machine_extruder_trains": { "0": "z-bolt_extruder_0" }
  13. },
  14. "overrides":
  15. {
  16. "gantry_height": { "value": "55" },
  17. "machine_center_is_zero": { "default_value": false },
  18. "machine_depth": { "default_value": 200 },
  19. "machine_end_gcode": { "default_value": "'M104 S0 ;extruder heater off' + ('\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 Z0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning'" },
  20. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  21. "machine_head_with_fans_polygon":
  22. {
  23. "default_value": [
  24. [-75, 35],
  25. [-75, -18],
  26. [18, 35],
  27. [18, -18]
  28. ]
  29. },
  30. "machine_heated_bed": { "default_value": true },
  31. "machine_height": { "default_value": 240 },
  32. "machine_name": { "default_value": "Z-Bolt Classic" },
  33. "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
  34. "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
  35. "machine_width": { "default_value": 200 }
  36. }
  37. }