| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576 |
- [general]
- definition = imade3d_jellybox_2
- name = Medium
- version = 4
- [metadata]
- global_quality = True
- quality_type = normal
- setting_version = 21
- type = quality
- weight = 0
- [values]
- adhesion_type = skirt
- bottom_thickness = =top_bottom_thickness
- bridge_enable_more_layers = False
- bridge_settings_enabled = True
- bridge_skin_material_flow = 85
- bridge_skin_speed = 20
- bridge_wall_material_flow = 85
- bridge_wall_speed = 20
- coasting_enable = True
- coasting_min_volume = 2
- coasting_volume = 0.032
- cool_fan_speed_max = =cool_fan_speed
- infill_before_walls = False
- infill_enable_travel_optimization = True
- infill_line_width = =round(line_width * 1.5, 2)
- infill_pattern = zigzag
- infill_sparse_density = 25
- layer_height = 0.2
- layer_height_0 = 0.3
- line_width = =machine_nozzle_size
- material_bed_temperature = =default_material_bed_temperature
- material_bed_temperature_layer_0 = =material_bed_temperature + 5
- material_print_temperature = =default_material_print_temperature
- material_print_temperature_layer_0 = =material_print_temperature + 5
- print_sequence = all_at_once
- retract_at_layer_change = True
- retraction_combing = noskin
- retraction_combing_max_distance = 50
- retraction_hop = 0.2
- retraction_hop_enabled = True
- retraction_min_travel = =machine_nozzle_size * 3
- retraction_retract_speed = =retraction_speed
- roofing_layer_count = 1
- skin_line_width = =line_width * 1.2
- skin_outline_count = 2
- skirt_brim_minimal_length = 100
- skirt_brim_speed = =speed_layer_0
- skirt_gap = 5
- skirt_line_count = 1
- speed_layer_0 = 20
- speed_roofing = 20
- speed_topbottom = 25
- speed_travel = =speed_print if magic_spiralize else 120
- speed_travel_layer_0 = 60
- support_angle = 60
- support_bottom_enable = False
- support_bottom_height = 0
- support_connect_zigzags = False
- support_enable = False
- support_infill_rate = 20
- support_interface_density = 70
- support_interface_enable = True
- support_interface_height = 2
- support_interface_pattern = concentric
- support_interface_skip_height = 0.1
- support_type = everywhere
- support_use_towers = False
- support_xy_distance = 0.8
- support_xy_distance_overhang = =machine_nozzle_size / 2
- support_z_distance = 0.2
- travel_retract_before_outer_wall = True
- wall_0_wipe_dist = =round(line_width * 1.2,1)
|
