creality_ender3s1pro.def.json 2.0 KB

123456789101112131415161718192021222324252627282930313233343536
  1. {
  2. "version": 2,
  3. "name": "Creality Ender-3 S1 Pro",
  4. "inherits": "creality_base",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "quality_definition": "creality_base"
  9. },
  10. "overrides":
  11. {
  12. "acceleration_enabled": { "value": true },
  13. "acceleration_travel": { "value": 2000 },
  14. "gantry_height": { "value": 25 },
  15. "machine_depth": { "default_value": 220 },
  16. "machine_head_with_fans_polygon":
  17. {
  18. "default_value": [
  19. [-26, 34],
  20. [-26, -32],
  21. [32, -32],
  22. [32, 34]
  23. ]
  24. },
  25. "machine_height": { "default_value": 270 },
  26. "machine_name": { "default_value": "Creality Ender-3 S1 Pro" },
  27. "machine_start_gcode": { "default_value": "; Ender 3 S1 Pro Start G-code\n; M413 S0 ; Disable power loss recovery\nG92 E0 ; Reset Extruder\n\n; Prep surfaces before auto home for better accuracy\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0}\n\nG28 O ; Home all untrusted axes\nG1 Z10.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0 Y0\n\nM190 S{material_bed_temperature_layer_0}\nM109 S{material_print_temperature_layer_0}\n\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish\n" },
  28. "machine_width": { "default_value": 220 },
  29. "retraction_amount": { "value": 0.8 },
  30. "retraction_extrusion_window": { "value": 1.5 },
  31. "retraction_speed": { "default_value": 40 },
  32. "speed_layer_0": { "value": 25 },
  33. "speed_print": { "value": 60 },
  34. "speed_travel": { "value": "120.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" }
  35. }
  36. }