Cura/resources/definitions/vertex_nano_k8600.def.json

{
    "version": 2,
    "name": "Vertex K8600",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "manufacturer": "Velleman N.V.",
        "file_formats": "text/x-gcode",
        "supports_usb_connection": true,
        "supported_actions": ["MachineSettingsAction"],
        "machine_extruder_trains": {
            "0": "vertex_nano_k8600_extruder_0"
        }
    },
    "overrides": {
        "machine_name": {
            "default_value": "Vertex K8600"
        },
        "machine_heated_bed": {
            "default_value": false
        },
        "machine_width": {
            "default_value": 80
        },
        "machine_height": {
            "default_value": 75
        },
        "machine_depth": {
            "default_value": 80
        },
        "machine_center_is_zero": {
            "default_value": false
        },
        "machine_gcode_flavor": {
            "default_value": "RepRap (Marlin/Sprinter)"
        },
        "machine_start_gcode": {
            "default_value": "; Vertex Nano Start G-code M0 is my nozzle clean M400 G28 ; Home extruder G90 ; Absolute positioning M82 ; Extruder in absolute mode M104 T0 S{material_print_temperature} G92 E0 ; Reset extruder position G1 Z1 F800 M109 T0 S{material_print_temperature} M117 Priming nozzle... M83 G1 E20 F100 ; purge/prime nozzle M82 G92 E0 ; Reset extruder position G4 S3 ; Wait 3 seconds G1 Z5 F2000 M117 Vertex Nano is printing"
        },
        "machine_end_gcode": {
            "default_value": "; Vertex Nano end G-Code G91 ; Relative positioning T0 G1 E-1 F1500; Reduce filament pressure M104 T0 S0 G90 ; Absolute positioning G92 E0 ; Reset extruder position G28 M84 ; Turn steppers off"
        },
        "line_width": {
            "value": 0.35
        },
        "infill_line_width": {
            "value": 0.35
        },
        "wall_thickness": {
            "value": "0.7"
        },
        "top_bottom_thickness": {
            "value": 0.6
        },
        "infill_sparse_density": {
            "value": 40
        },
        "infill_overlap": {
            "value": 5
        },
        "min_infill_area": {
            "value": 0.1
        },
        "retract_at_layer_change": {
            "value": true
        },
        "retraction_min_travel": {
            "value": 1
        },
        "retraction_count_max": {
            "value": 15
        },
        "retraction_extrusion_window": {
            "value": 1
        }
    }
}