Cura/resources/definitions/SV02.def.json

{
    "version": 2,
    "name": "Sovol-SV02",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Sovol",
        "manufacturer": "Sovol 3D",
        "file_formats": "text/x-gcode",
        "has_variants": false,
        "has_machine_quality": false,
        "preferred_quality_type": "draft",
        "machine_extruder_trains": {
            "0": "SV02_extruder_0",
            "1": "SV02_extruder_1"
        }
    },
    
    "overrides": {
        "machine_name": { "default_value": "SV02" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_heated_bed": { "default_value": true },
        "machine_width": { "default_value": 300 },
        "machine_depth": { "default_value": 250	},
        "machine_height": { "default_value": 300 },
        "machine_center_is_zero": { "default_value": false },
        "retraction_amount": { "default_value": 5},
        "retraction_speed": { "default_value": 50},
        "gantry_height": { "value": "30" },
        "speed_print": { "default_value": 50 },		
	    "material_print_temperature": { "value": 195 },
        "material_print_temperature_layer_0": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_final_print_temperature": { "value": 195 },		
        "machine_max_feedrate_x": { "value": 500 },
        "machine_max_feedrate_y": { "value": 500 },
        "machine_max_feedrate_z": { "value": 10 },
        "machine_max_feedrate_e": { "value": 50 },
        "machine_max_acceleration_x": { "value": 500 },
        "machine_max_acceleration_y": { "value": 500 },
        "machine_max_acceleration_z": { "value": 100 },
        "machine_max_acceleration_e": { "value": 500 },
        "machine_acceleration": { "value": 500 },
        "machine_max_jerk_xy": { "value": 8 },
        "machine_max_jerk_z": { "value": 0.4 },
        "machine_max_jerk_e": { "value": 5 },
        "material_diameter": { "default_value": 1.75 },
        "infill_overlap": { "default_value": 15	},
        "acceleration_print": { "value": 500 },
        "acceleration_travel": { "value": 500 },
        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
        "jerk_print": { "value": 8 },
        "jerk_travel": { "value": "jerk_print" },
        "jerk_travel_layer_0": { "value": "jerk_travel" },
        "acceleration_enabled": { "value": false },
        "jerk_enabled": { "value": false },
        "machine_max_jerk_xy": { "default_value": 5.0 },
        "machine_max_jerk_z": { "default_value": 0.4 },
        "machine_max_jerk_e": { "default_value": 5.0 },
        "prime_tower_position_x": { "value": "240" },
        "prime_tower_position_y": { "value": "190" },
        "prime_tower_size": { "value": "30" },
        "prime_tower_wipe_enabled": { "default_value": true },
        "prime_tower_min_volume": { "value":  "((resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height'))/2"},
        "travel_retract_before_outer_wall": { "default_value": true },
        "infill_sparse_density": { "value": "15" },
        "infill_pattern": { "value": "'lines'" },
        "infill_before_walls": { "value": false },
        "infill_overlap": { "value": 30.0 },
        "skin_overlap": { "value": 10.0 },
        "infill_wipe_dist": { "value": 0.0 },
        "wall_0_wipe_dist": { "value": 0.0 },
        "adhesion_type": { "value": "'skirt'" },
        "brim_replaces_support": { "value": false },
        "skirt_gap": { "value": 2 },
        "skirt_line_count": { "value": 3 },
        "adhesion_extruder_nr": { "value": 1 },
        "brim_width": { "value": 4 },
        "coasting_enable": { "default_value": true },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_start_gcode": { "default_value": "G21 ;metric values\nG28 ;home all\nG90 ;absolute positioning\nM107 ;start with the fan off\nG1 F2400 Z15.0 ;raise the nozzle 15mm\nM109 S{material_print_temperature} ;Set Extruder Temperature and Wait\nM190 S{material_bed_temperature}; Wait for bed temperature to reach target temp\nT0 ;Switch to Extruder 1\nG1 F3000 X5 Y10 Z0.2 ;move to prime start position\nG92 E0 ;reset extrusion distance\nG1 F600 X160 E5 ;prime nozzle in a line\nG1 F5000 X180 ;quick wipe\nG92 E0 ;reset extrusion distance" },
        "machine_end_gcode": { "default_value": "M104 S0  ;hotend off\nM140 S0  ;bed off\nG92 E0\nG1 F2000 E-100  ;retract filament 100mm\nG92 E0\nG1 F3000 X0 Y240  ;move bed for easy part removal\nM84  ;disable steppers" },
        "top_bottom_thickness": { "default_value": 1 }
    }
}