ultimaker3_aa04.inst.cfg 908 B

123456789101112131415161718192021222324252627282930
  1. [general]
  2. name = AA 0.4
  3. version = 4
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 20
  7. type = variant
  8. hardware_type = nozzle
  9. [values]
  10. brim_width = 7
  11. machine_nozzle_cool_down_speed = 0.9
  12. machine_nozzle_id = AA 0.4
  13. machine_nozzle_tip_outer_diameter = 1.0
  14. retraction_amount = 6.5
  15. retraction_min_travel = =line_width * 2
  16. retraction_prime_speed = =retraction_speed
  17. skin_overlap = 15
  18. speed_print = 70
  19. speed_topbottom = =math.ceil(speed_print * 30 / 70)
  20. speed_wall = =math.ceil(speed_print * 30 / 70)
  21. support_angle = 60
  22. support_bottom_distance = =support_z_distance / 2
  23. support_top_distance = =support_z_distance
  24. support_z_distance = =layer_height * 2
  25. switch_extruder_prime_speed = =switch_extruder_retraction_speeds
  26. switch_extruder_retraction_amount = =machine_heat_zone_length
  27. top_bottom_thickness = 1.2
  28. xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset