ultimaker_s3_aa0.8.inst.cfg 1.5 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152
  1. [general]
  2. name = AA 0.8
  3. version = 4
  4. definition = ultimaker_s3
  5. [metadata]
  6. setting_version = 20
  7. type = variant
  8. hardware_type = nozzle
  9. [values]
  10. brim_width = 7
  11. cool_fan_speed = 7
  12. cool_fan_speed_max = 100
  13. cool_min_speed = 5
  14. default_material_print_temperature = 200
  15. infill_overlap = 0
  16. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  17. infill_wipe_dist = 0
  18. jerk_print = 25
  19. layer_height = 0.2
  20. machine_min_cool_heat_time_window = 15
  21. machine_nozzle_cool_down_speed = 0.85
  22. machine_nozzle_heat_up_speed = 1.5
  23. machine_nozzle_id = AA 0.8
  24. machine_nozzle_size = 0.8
  25. machine_nozzle_tip_outer_diameter = 2.0
  26. material_final_print_temperature = =material_print_temperature - 10
  27. material_initial_print_temperature = =material_print_temperature - 5
  28. material_standby_temperature = 100
  29. multiple_mesh_overlap = 0
  30. prime_tower_enable = False
  31. prime_tower_wipe_enabled = True
  32. retract_at_layer_change = =not magic_spiralize
  33. retraction_amount = 6.5
  34. retraction_hop = 2
  35. retraction_hop_only_when_collides = True
  36. retraction_min_travel = =line_width * 2
  37. retraction_speed = 25
  38. skin_overlap = 5
  39. speed_layer_0 = 20
  40. speed_print = 35
  41. speed_topbottom = =math.ceil(speed_print * 25 / 35)
  42. speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
  43. support_angle = 60
  44. support_bottom_distance = =support_z_distance / 2
  45. support_top_distance = =support_z_distance
  46. support_z_distance = =layer_height * 2
  47. switch_extruder_prime_speed = 20
  48. switch_extruder_retraction_amount = 16.5
  49. top_bottom_thickness = 1.4
  50. wall_0_inset = 0