ultimaker3_extended_aa04.inst.cfg 1.2 KB

123456789101112131415161718192021222324252627282930313233343536373839
  1. [general]
  2. name = AA 0.4
  3. version = 4
  4. definition = ultimaker3_extended
  5. [metadata]
  6. setting_version = 20
  7. type = variant
  8. hardware_type = nozzle
  9. [values]
  10. brim_width = 7
  11. machine_nozzle_cool_down_speed = 0.9
  12. machine_nozzle_id = AA 0.4
  13. machine_nozzle_tip_outer_diameter = 1.0
  14. raft_acceleration = =acceleration_print
  15. raft_airgap = 0.3
  16. raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
  17. raft_interface_line_spacing = =raft_interface_line_width + 0.2
  18. raft_interface_line_width = =line_width * 2
  19. raft_interface_thickness = =layer_height * 1.5
  20. raft_jerk = =jerk_print
  21. raft_margin = 15
  22. raft_surface_layers = 2
  23. retraction_amount = 6.5
  24. retraction_min_travel = =line_width * 2
  25. retraction_prime_speed = =retraction_speed
  26. skin_overlap = 15
  27. speed_print = 70
  28. speed_topbottom = =math.ceil(speed_print * 30 / 70)
  29. speed_wall = =math.ceil(speed_print * 30 / 70)
  30. support_angle = 60
  31. support_bottom_distance = =support_z_distance / 2
  32. support_top_distance = =support_z_distance
  33. support_z_distance = =layer_height * 2
  34. switch_extruder_prime_speed = =switch_extruder_retraction_speeds
  35. switch_extruder_retraction_amount = =machine_heat_zone_length
  36. top_bottom_thickness = 1.2
  37. xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset