Cura/resources/variants/arjun300_pva_0.4.inst.cfg

[general]
name = PVA 0.4 mm Nozzle
version = 4
definition = arjun300

[metadata]

setting_version = 20
type = variant
hardware_type = nozzle

[values]
machine_nozzle_size = 0.4
support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
support_offset = 3
support_bottom_height = =layer_height * 2
support_bottom_pattern = zigzag
support_bottom_stair_step_height = =layer_height
support_infill_rate = 50
support_interface_enable = True
support_interface_height = =layer_height * 5
support_interface_skip_height = =layer_height
support_join_distance = 3
support_xy_distance = =machine_nozzle_size / 2
support_xy_distance_overhang = =machine_nozzle_size / 2
support_angle = 45
support_pattern = triangles
support_use_towers = False
support_z_distance = 0
gradual_support_infill_steps = 2
support_interface_density = 100
support_interface_pattern = concentric