Cura/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg

[general]
version = 4
name = Sprint
definition = ultimaker3

[metadata]
setting_version = 20
type = quality
quality_type = superdraft
weight = -4
material = generic_tough_pla
variant = AA 0.8

[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
layer_height_0 = 0.4
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
material_print_temperature = =default_material_print_temperature + 5
prime_tower_enable = False
raft_margin = 10
retract_at_layer_change = False
speed_infill = =math.ceil(speed_print * 30 / 30)
speed_print = 30
speed_topbottom = =math.ceil(speed_print * 20 / 30)
speed_wall = =math.ceil(speed_print * 25/ 30)
speed_wall_0 = =math.ceil(speed_print * 20 / 30)
support_angle = 70
top_bottom_thickness = =layer_height * 4