s3d_ht0.4_COPA_B.inst.cfg 1.9 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162
  1. [general]
  2. version = 4
  3. name = B
  4. definition = strateo3d
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = b
  9. weight = 0
  10. material = emotiontech_copa
  11. variant = High temp 0.4
  12. [values]
  13. layer_height_0 = =round(0.67*machine_nozzle_size, 2)
  14. line_width = =machine_nozzle_size/machine_nozzle_size*0.4
  15. wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
  16. wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
  17. wall_0_wipe_dist = =machine_nozzle_size/2
  18. wall_line_count = 3
  19. speed_print = 35
  20. speed_wall = =math.ceil(speed_print * 37/55)
  21. speed_wall_0 = =math.ceil(speed_wall * 33/37)
  22. speed_topbottom = =math.ceil(speed_print * 37/55)
  23. speed_layer_0 = =math.ceil(speed_print * 25/55)
  24. speed_slowdown_layers = 2
  25. cool_fan_enabled = True
  26. cool_fan_speed = 20
  27. cool_fan_speed_max = 80
  28. cool_min_layer_time_fan_speed_max = 20
  29. cool_min_layer_time = 2
  30. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  31. cool_min_speed = 2
  32. cool_lift_head = True
  33. support_angle = 60
  34. material_print_temperature = =default_material_print_temperature
  35. material_print_temperature_layer_0 = =default_material_print_temperature + 5
  36. material_initial_print_temperature = =default_material_print_temperature
  37. material_final_print_temperature = =default_material_print_temperature
  38. material_flow = 91
  39. skin_material_flow = 92
  40. retraction_extra_prime_amount = 0.1
  41. retraction_min_travel = =3*line_width
  42. retraction_hop_only_when_collides = True
  43. skin_overlap = 15
  44. support_z_distance = =layer_height*2
  45. support_bottom_distance = =support_z_distance*0.5
  46. support_xy_distance = =line_width * 1.7
  47. support_xy_distance_overhang = =wall_line_width_0
  48. support_offset = 1
  49. support_interface_density = 100
  50. prime_tower_enable = True
  51. bridge_settings_enabled = True
  52. bridge_wall_coast = 50
  53. bridge_wall_speed = 8
  54. bridge_wall_material_flow = 50
  55. bridge_skin_speed = 8
  56. bridge_skin_material_flow = 60
  57. bridge_skin_density = 80
  58. bridge_fan_speed = 80
  59. meshfix_maximum_resolution = 0.5
  60. meshfix_maximum_deviation = 0.04