Cura/resources/quality/katihal/kupido_normal.inst.cfg

[general]
version = 4
name = Normal
definition = kupido

[metadata]
setting_version = 20
type = quality
quality_type = kupido_normal
weight = 0
global_quality = True

[values]
layer_height = 0.16
layer_height_0 = 0.1
adhesion_type = raft
skirt_line_count = 2
skirt_gap = 2
fill_outline_gaps = True
infill_angles = [0,90 ]
infill_sparse_density = 15
retraction_min_travel = 0.8
skin_angles = [0,90]
top_layers = 6
wall_line_count = 2
infill_pattern = grid
skin_line_width = 0.4
raft_base_line_spacing = 2.6
raft_base_line_width = 1.2
raft_base_thickness = 0.3
raft_interface_line_width = 0.4
raft_interface_thickness = 0.3
raft_interface_line_spacing = 0.8
raft_margin = 5
raft_surface_layers = 3
raft_surface_line_width = 0.4
raft_surface_thickness = 0.2
retract_at_layer_change = true
retraction_hop = 0.5
retraction_hop_enabled = true
support_type = everywhere
support_interface_pattern =lines
support_top_distance = 0.15
support_z_distance = 0.25
support_bottom_distance = 0.15
support_brim_width = 6
support_infill_rate = =15 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 15
support_line_distance = 1.7
support_line_width = 0.25
support_initial_layer_line_distance = 2.7
support_xy_distance = 0.7
infill_line_width = 0.4
line_width = 0.4
optimize_wall_printing_order = True
support_angle = 70
wall_line_width_x = 0.4
wall_line_width_0 = 0.35