Cura/resources/quality/deltacomb/PETG/deltacomb_FBE0.40_PETG_D.inst.cfg

[general]
version = 4
name = D
definition = deltacomb_base

[metadata]
setting_version = 20
type = quality
quality_type = D020
material = generic_petg
variant = FBE 0.40mm

[values]
material_print_temperature = 225
cool_fan_full_at_height = 1
cool_fan_speed = 60
cool_fan_speed_max = 100
cool_fan_speed_min = 60
speed_print = 50
speed_infill = =speed_print
speed_wall_0 = =speed_print * 0.5
speed_roofing = =speed_print * 0.5
material_bed_temperature = 60
material_bed_temperature_layer_0 = 45
material_flow = 95
infill_enable_travel_optimization = True
initial_layer_line_width_factor = 120
retraction_amount = 5
coasting_enable = True
coasting_volume = 0.256
coasting_min_volume = 3
coasting_speed = 70
travel_avoid_other_parts = False
retraction_combing_max_distance = 5