| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546 |
- {
- "version": 2,
- "name": "SyndaverAxi2",
- "inherits": "fdmprinter",
- "metadata":
- {
- "type": "machine",
- "visible": true,
- "author": "Syndaver3D",
- "manufacturer": "Syndaver3D",
- "file_formats": "text/x-gcode",
- "supports_usb_connection": true,
- "preferred_quality_type": "draft",
- "machine_extruder_trains":
- {
- "0": "syndaveraxi2_extruder_0"
- }
- },
- "overrides": {
- "machine_name": { "default_value": "AXI2" },
- "machine_shape": { "default_value": "rectangular"},
- "machine_heated_bed": { "default_value": true },
- "machine_width": { "default_value": 280 },
- "machine_depth": { "default_value": 280 },
- "machine_height": { "default_value": 280 },
- "machine_center_is_zero": { "default_value": false },
- "machine_head_with_fans_polygon": {
- "default_value": [
- [ 0, 0 ],
- [ 0, 0 ],
- [ 0, 0 ],
- [ 0, 0 ]
- ]
- },
- "gantry_height": { "value": "60" },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_start_gcode": {
- "default_value": ";This G-Code has been generated specifically for Syndaver AXI 2 with Hemera toolhead\nM73 P0 ; clear LCD progress bar\nM75 ; Start LCD Print Timer\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{material_bed_temperature_layer_0} ; start bed heating up\nM104 S170 ; start nozzle heating up\nG28 ; home all axes\nM117 AXI Heating Up...\nG1 X-17.5 Y100 F3000 ; move to wiper pad\nG1 Z10 F5000 ; move to wiper pad\nG29 L1 ; load leveling matrix slot 1\nG29 A ; ensure mesh is enabled\nM109 R170 ; wait for nozzle to reach wiping temp\nG1 E-3 ; retract material before wipe\nM117 AXI Wiping Nozzle...\nG1 Z-3 ; lower nozzle\nG1 Y90 F1000 ; slow wipe\nG1 Y65 F1000 ; slow wipe\nG1 Y80 F1000 ; slow wipe\nG1 Y65 F1000 ; slow wipe\nG1 Y55 F1000 ; slow wipe\nG1 Y30 F3000 ; fast wipe\nG1 Y55 F3000 ; fast wipe\nG1 Y30 F3000 ; fast wipe\nG1 Y55 F3000 ; fast wipe\nG1 Z10 ; raise nozzle\nM117 Heating...\nM190 R{material_bed_temperature_layer_0} ; wait for bed to reach printing temp\nM104 S{material_print_temperature_layer_0} ; set extruder to reach initial printing temp, held back for ooze reasons\nM117 Probe Z at Temp\nG28 Z ; re-probe Z0 to account for any thermal expansion in the bed\nG1 X-17.5 Y80 F3000 ; move to wiper pad\nG1 Z10 F5000 ; move to wiper pad\nM117 Heating...\nM109 R{material_print_temperature_layer_0} ; wait for extruder to reach initial printing temp\nM117 AXI Wiping Nozzle...\nG1 E0 ; prime material in nozzle\nG1 Z-3 ; final ooze wipe\nG1 Y60 F2000 ; final ooze wipe\nG1 Y20 F2000 ; final ooze wipe\nM117 AXI Starting Print\nG1 Z2 ; move nozzle back up to not run into things on print start\nM400 ; wait for moves to finish\nM117 AXI Printing"
- },
- "machine_end_gcode": {
- "default_value": "M400 ; wait for moves to finish\nM140 S50 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nM117 Cooling please wait\nG91 ; relative positioning\nG1 Z5 F3000 ; move Z up 5mm so it wont drag on the print\nG90 ; absolute positioning\nG1 X5 Y5 F3000 ; move to cooling position\nM190 R50 ; wait for bed to cool down to removal temp\nG1 X145 Y260 F1000 ; present finished print\nM140 S0 ; cool down bed\nM77 ; End LCD Print Timer\nM18 X Y E ; turn off x y and e axis\nM117 Print Complete."
- }
- }
- }
|
