mp_mini_delta.def.json 4.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172
  1. {
  2. "version": 2,
  3. "name": "MP Mini Delta",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "author": "MPMD V1 Facebook Group",
  7. "manufacturer": "Monoprice",
  8. "file_formats": "text/x-gcode",
  9. "platform": "mp_mini_delta_platform.3mf",
  10. "supports_usb_connection": true,
  11. "has_machine_quality": false,
  12. "visible": true,
  13. "platform_offset": [0, 0, 0],
  14. "has_materials": true,
  15. "has_variants": false,
  16. "has_machine_materials": false,
  17. "has_variant_materials": false,
  18. "preferred_quality_type": "normal",
  19. "machine_extruder_trains":
  20. {
  21. "0": "mp_mini_delta_extruder_0"
  22. }
  23. },
  24. "overrides": {
  25. "machine_start_gcode":
  26. {
  27. "default_value": ";MPMD V1 Basic Calibration Tutorial: \n; https://www.thingiverse.com/thing:3892011 \n; \n; If you want to put calibration values in your \n; Start Gcode, put them here. \n; \n;If on stock firmware, at minimum, consider adding \n;M665 R here since there is a firmware bug. \n; \n; Calibration part ends here \n; \nG90 ; switch to absolute positioning \nG92 E0 ; reset extrusion distance \nG1 E20 F200 ; purge 20mm of filament to prime nozzle. \nG92 E0 ; reset extrusion distance \nG4 S5 ; Pause for 5 seconds to allow time for removing extruded filament \nG28 ; start from home position \nG1 E-6 F900 ; retract 6mm of filament before starting the bed leveling process \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for removing extruded filament \nG29 P2 Z0.28 ; Auto-level ; ADJUST Z higher or lower to set first layer height. Start with 0.02 adjustments. \nG1 Z30 ; raise Z 30mm to prepare for priming the nozzle \nG1 E5 F200 ; extrude 5mm of filament to help prime the nozzle just prior to the start of the print \nG92 E0 ; reset extrusion distance \nG4 S5 ; pause for 5 seconds to allow time for cleaning the nozzle and build plate if needed "
  28. },
  29. "machine_end_gcode":
  30. {
  31. "default_value": "M107; \nM104 S0; turn off hotend heater \nM140 S0; turn off bed heater \nG91; Switch to use Relative Coordinates \nG1 E-2 F300; retract the filament a bit before lifting the nozzle to release some of the pressure \nG1 Z5 E-5 F4800; move nozzle up a bit and retract filament even more \nG28 X0; return to home positions so the nozzle is out of the way \nM84; turn off stepper motors \nG90; switch to absolute positioning \nM82; absolute extrusion mode"
  32. },
  33. "machine_width": { "default_value": 110 },
  34. "machine_depth": { "default_value": 110 },
  35. "machine_height": { "default_value": 120 },
  36. "machine_heated_bed": { "default_value": true },
  37. "machine_shape": { "default_value": "elliptic" },
  38. "machine_center_is_zero": { "default_value": true },
  39. "machine_nozzle_size": {
  40. "default_value": 0.4
  41. },
  42. "layer_height": {
  43. "default_value": 0.14
  44. },
  45. "layer_height_0": {
  46. "default_value": 0.21
  47. },
  48. "material_bed_temperature": { "value": 40 },
  49. "line_width": { "value": "round(machine_nozzle_size, 2)" },
  50. "material_print_temperature_layer_0": { "value": "material_print_temperature" },
  51. "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
  52. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  53. "machine_max_feedrate_x": { "default_value": 150 },
  54. "machine_max_feedrate_y": { "default_value": 150 },
  55. "machine_max_feedrate_z": { "default_value": 150 },
  56. "machine_max_feedrate_e": { "default_value": 50 },
  57. "machine_max_acceleration_x": { "default_value": 800 },
  58. "machine_max_acceleration_y": { "default_value": 800 },
  59. "machine_max_acceleration_z": { "default_value": 800 },
  60. "machine_max_acceleration_e": { "default_value": 10000 },
  61. "machine_acceleration": { "default_value": 3000 },
  62. "machine_max_jerk_xy": { "default_value": 20 },
  63. "machine_max_jerk_z": { "default_value": 20 },
  64. "machine_max_jerk_e": { "default_value": 5},
  65. "retraction_amount": { "default_value": 4 },
  66. "retraction_speed": { "default_value": 50 },
  67. "retraction_hop_enabled": { "default_value": false },
  68. "retract_at_layer_change": { "default_value": true },
  69. "coasting_enable": { "default_value": true }
  70. }
  71. }