gmax15plus.def.json 3.0 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253
  1. {
  2. "version": 2,
  3. "name": "gMax 1.5 Plus",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "gcreate",
  8. "manufacturer": "gcreate",
  9. "file_formats": "text/x-gcode",
  10. "platform": "gmax_1-5_xt-plus_s3d_full model_150707.3mf",
  11. "has_machine_quality": true,
  12. "has_variants": true,
  13. "variants_name": "Hotend",
  14. "preferred_variant_name": "0.5mm E3D (Default)",
  15. "preferred_quality_type": "gmax15plus_global_normal",
  16. "machine_extruder_trains": {
  17. "0": "gmax15plus_extruder_0"
  18. }
  19. },
  20. "overrides": {
  21. "machine_extruder_count": { "default_value": 1 },
  22. "machine_name": { "default_value": "gMax 1.5 Plus" },
  23. "machine_heated_bed": { "default_value": false },
  24. "machine_width": { "default_value": 406 },
  25. "machine_depth": { "default_value": 406 },
  26. "machine_height": { "default_value": 533 },
  27. "machine_center_is_zero": { "default_value": false },
  28. "material_diameter": { "default_value": 1.75 },
  29. "machine_nozzle_size": { "default_value": 0.5 },
  30. "layer_height": { "default_value": 0.2 },
  31. "layer_height_0": { "default_value": 0.3 },
  32. "retraction_amount": { "default_value": 1 },
  33. "retraction_speed": { "default_value": 70},
  34. "adhesion_type": { "default_value": "skirt" },
  35. "gantry_height": { "value": "50" },
  36. "speed_print": { "default_value": 50 },
  37. "machine_max_acceleration_x": { "default_value": 600 },
  38. "machine_max_acceleration_y": { "default_value": 600 },
  39. "machine_max_acceleration_z": { "default_value": 30 },
  40. "machine_max_acceleration_e": { "default_value": 10000 },
  41. "machine_max_jerk_xy": { "default_value": 8 },
  42. "machine_max_jerk_z": { "default_value": 0.4 },
  43. "machine_max_jerk_e": { "default_value": 5.0 },
  44. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  45. "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} ; Preheat\nM109 S{material_print_temperature} ; Preheat\nG91 ;relative positioning\nG90 ;absolute positioning\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
  46. "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
  47. "wall_thickness": { "value": "1" },
  48. "top_bottom_thickness": { "default_value": 1 }
  49. }
  50. }