eryone_er20.def.json 6.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241
  1. {
  2. "version": 2,
  3. "name": "Eryone ER20",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Eryone3d",
  8. "manufacturer": "Eryone",
  9. "file_formats": "text/x-gcode",
  10. "platform": "eryone_er20_plateform.stl",
  11. "has_machine_quality": true,
  12. "preferred_quality_type": "high",
  13. "machine_extruder_trains":
  14. {
  15. "0": "eryone_er20_extruder_0"
  16. }
  17. },
  18. "overrides": {
  19. "machine_name": {
  20. "default_value": "Eryone ER20"
  21. },
  22. "machine_heated_bed": {
  23. "default_value": true
  24. },
  25. "machine_width": {
  26. "default_value": 250
  27. },
  28. "machine_height": {
  29. "default_value": 200
  30. },
  31. "machine_depth": {
  32. "default_value": 220
  33. },
  34. "machine_center_is_zero": {
  35. "default_value": false
  36. },
  37. "machine_gcode_flavor": {
  38. "default_value": "RepRap (Marlin/Sprinter)"
  39. },
  40. "machine_head_with_fans_polygon": {
  41. "default_value": [
  42. [-10, -10],
  43. [-10, 10],
  44. [10, 10],
  45. [10, -10]
  46. ]
  47. },
  48. "gantry_height":{ "value": "0" },
  49. "machine_start_gcode": {
  50. "default_value": "G21 ;Metric values\nG90 ;Absolute positioning\nM82 ;Set extruder to absolute mode\nM107 ;Start with the fan off\nG28 ;Homing the hotend\nG29 ;Auto bed leveling detecting\nG92 E0 ;Reset the extruded length\nG1 F200 E3 ;Extrude 3mm of filament\nG92 E0 ;Reset the extruded length again\nG1 Y-3 F1200 ;Move y axis to prime\nG1 X150 F6000 ;Move x axis to prime\nG1 Z0.2 F720 ;Move z axis to prime\nG1 X80.0 E8.0 F900 ;Prime line\nG1 X20.0 E10.0 F700 ;Prime line\nG92 E0 ;Reset the extruded length\nG5 ;Enable resume from power failure\nM117 Printing...\n"
  51. },
  52. "machine_end_gcode": {
  53. "default_value": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X230 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n"
  54. },
  55. "material_print_temperature": {
  56. "value": 205
  57. },
  58. "material_print_temperature_layer_0": {
  59. "value": 215
  60. },
  61. "material_initial_print_temperature": {
  62. "value": 205
  63. },
  64. "material_final_print_temperature": {
  65. "value": 205
  66. },
  67. "acceleration_enabled": {
  68. "value": true
  69. },
  70. "acceleration_travel": {
  71. "value": 1800
  72. },
  73. "adhesion_type": {
  74. "value": "'brim'"
  75. },
  76. "brim_width": {
  77. "value": 5
  78. },
  79. "cool_fan_full_at_height": {
  80. "value": 0.5
  81. },
  82. "cool_fan_speed": {
  83. "value": 100
  84. },
  85. "cool_fan_speed_0": {
  86. "value": 100
  87. },
  88. "infill_overlap": {
  89. "value": "25 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0",
  90. "maximum_value_warning": 100,
  91. "minimum_value_warning": -50
  92. },
  93. "infill_pattern": {
  94. "value": "'grid'"
  95. },
  96. "infill_sparse_density": {
  97. "value": 20
  98. },
  99. "initial_layer_line_width_factor": {
  100. "value": 105
  101. },
  102. "infill_before_walls": {
  103. "value": false
  104. },
  105. "material_bed_temperature": {
  106. "value": 60
  107. },
  108. "material_bed_temperature_layer_0": {
  109. "value": 65
  110. },
  111. "optimize_wall_printing_order": {
  112. "default_value": true
  113. },
  114. "retract_at_layer_change": {
  115. "value": true
  116. },
  117. "retraction_amount": {
  118. "default_value": 4
  119. },
  120. "retraction_hop": {
  121. "value": 0.075
  122. },
  123. "retraction_hop_enabled": {
  124. "value": false
  125. },
  126. "retraction_hop_only_when_collides": {
  127. "value": true
  128. },
  129. "retraction_min_travel": {
  130. "value": 1.5
  131. },
  132. "retraction_speed": {
  133. "default_value": 85,
  134. "maximum_value_warning": 100
  135. },
  136. "retraction_retract_speed": {
  137. "maximum_value_warning": 130
  138. },
  139. "retraction_prime_speed": {
  140. "value": "math.ceil(retraction_speed * 0.4)",
  141. "maximum_value_warning": 130
  142. },
  143. "retraction_combing": {
  144. "value": "'noskin'"
  145. },
  146. "skin_overlap": {
  147. "value": 10
  148. },
  149. "skirt_brim_speed": {
  150. "value": 40
  151. },
  152. "skirt_gap": {
  153. "value": 5
  154. },
  155. "skirt_line_count": {
  156. "value": 3
  157. },
  158. "speed_infill": {
  159. "value": "speed_print"
  160. },
  161. "speed_topbottom": {
  162. "value": "math.ceil(speed_print * 20 / 50)"
  163. },
  164. "speed_travel": {
  165. "value": "150"
  166. },
  167. "speed_layer_0": {
  168. "value": "20"
  169. },
  170. "speed_wall": {
  171. "value": "speed_print"
  172. },
  173. "speed_wall_0": {
  174. "value": "math.ceil(speed_print * 30 / 50)"
  175. },
  176. "speed_wall_x": {
  177. "value": "speed_print"
  178. },
  179. "support_angle": {
  180. "value": 50
  181. },
  182. "support_enable": {
  183. "default_value": false
  184. },
  185. "support_interface_enable": {
  186. "value": true
  187. },
  188. "support_pattern": {
  189. "value": "'triangles'"
  190. },
  191. "support_roof_enable": {
  192. "value": true
  193. },
  194. "support_type": {
  195. "value": "'everywhere'"
  196. },
  197. "support_use_towers": {
  198. "value": false
  199. },
  200. "support_z_distance": {
  201. "value": 0.3
  202. },
  203. "support_xy_distance": {
  204. "value": 0.7
  205. },
  206. "support_xy_distance_overhang": {
  207. "value": 0.2
  208. },
  209. "smooth_spiralized_contours": {
  210. "value": false
  211. },
  212. "travel_retract_before_outer_wall": {
  213. "value": true
  214. },
  215. "wall_line_count": {
  216. "value": 3
  217. },
  218. "wall_thickness": {
  219. "value": "1.2"
  220. },
  221. "bottom_layers": {
  222. "value": "4"
  223. },
  224. "bottom_thickness":{
  225. "value": "layer_height * 4"
  226. },
  227. "top_thickness":{
  228. "value": "layer_height * 5"
  229. },
  230. "top_layers": {
  231. "value": "5"
  232. },
  233. "z_seam_type": {
  234. "value": "'shortest'"
  235. },
  236. "z_seam_corner": {
  237. "value": "'z_seam_corner_inner'"
  238. }
  239. }
  240. }