dagoma_discoeasy200.def.json 2.0 KB

12345678910111213141516171819202122232425262728293031323334
  1. {
  2. "name": "Dagoma DiscoEasy200",
  3. "version": 2,
  4. "inherits": "dagoma_disco",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Dagoma",
  8. "manufacturer": "Dagoma",
  9. "file_formats": "text/x-gcode",
  10. "platform": "dagoma_discoeasy200.3mf",
  11. "platform_offset": [0, -57, -39],
  12. "has_machine_quality": true,
  13. "has_materials": true,
  14. "preferred_material": "chromatik_pla",
  15. "machine_extruder_trains":
  16. {
  17. "0": "dagoma_discoeasy200_extruder"
  18. }
  19. },
  20. "overrides": {
  21. "machine_name": {
  22. "default_value": "Dagoma DiscoEasy200"
  23. },
  24. "machine_extruder_count": {
  25. "default_value": 1
  26. },
  27. "machine_start_gcode": {
  28. "default_value": ";Begin Start Gcode for Dagoma DiscoEasy 200\n;Sliced: {date} {time}\n;Initial extruder: {initial_extruder_nr}\n\nG90 ;Absolute positioning\nM106 S255 ;Fan on full\nG28 X Y ;Home stop X Y\nG1 X100 ;Centre back during cooldown in case of oozing\nM109 R{material_standby_temperature} ;Cooldown in case too hot\nG28 ;Centre\nG29 ;Auto-level\nM104 S{material_print_temperature_layer_0} ;Pre-heat\nM107 ;Fan off\nG0 X100 Y5 Z0.5 ;Front centre for degunk\nM109 S{material_print_temperature_layer_0} ;Wait for initial temp\nM83 ;E Relative\nG1 E10 F200 ;Degunk\nG1 E-3 F5000 ;Retract\nG0 Z3 ;Withdraw\nM82 ;E absolute\nG92 E0 ;E reset\nG1 F6000 ;Set feedrate\n\n;Finish Start Gcode for Dagoma DiscoEasy 200\n"
  29. },
  30. "machine_end_gcode": {
  31. "default_value": ";Begin End Gcode for Dagoma DiscoEasy 200\n\nM106 S255 ;Fan on full\nM104 S0 ;Cool hotend\nM140 S0 ;Cool heated bed\nG91 ;Relative positioning\nG1 E-3 F5000 ;Retract filament to stop oozing\nG0 Z+3 ;Withdraw\nG90 ;Absolute positioning\nG28 X Y ;Home\nM109 R{material_standby_temperature} ;Wait until head has cooled to standby temp\nM107 ;Fan off\nM18 ;Stepper motors off\n\n;Finish End Gcode for Dagoma DiscoEasy 200\n"
  32. }
  33. }
  34. }