um2pc_nylon_0.4_fast.inst.cfg 1.1 KB

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. [general]
  2. version = 4
  3. name = Normal
  4. definition = ultimaker2_plus_connect
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = draft
  9. weight = -1
  10. material = generic_nylon
  11. variant = 0.4 mm
  12. [values]
  13. cool_fan_speed_min = =cool_fan_speed * 0.35
  14. cool_min_layer_time = 3
  15. cool_min_speed = 15
  16. infill_overlap = =0 if infill_sparse_density > 80 else 5
  17. infill_sparse_density = 20
  18. layer_0_z_overlap = 0.22
  19. raft_airgap = 0.57
  20. raft_base_line_spacing = 1.6
  21. raft_base_line_width = 0.8
  22. raft_interface_line_spacing = 1
  23. raft_interface_line_width = 0.8
  24. raft_margin = 15
  25. raft_surface_line_width = 0.5
  26. raft_surface_thickness = 0.15
  27. retraction_prime_speed = =retraction_speed
  28. speed_layer_0 = =math.ceil(speed_print * 30 / 45)
  29. speed_print = 45
  30. speed_topbottom = =math.ceil(speed_print * 20 / 45)
  31. speed_travel = 150
  32. speed_wall = =math.ceil(speed_print * 40 / 45)
  33. support_angle = 45
  34. support_enable = True
  35. support_z_distance = =layer_height * 2
  36. top_bottom_thickness = 0.75
  37. speed_wall_0 = =math.ceil(speed_print * 30 / 45)
  38. speed_wall_x = =math.ceil(speed_print * 40 / 45)
  39. speed_infill = =math.ceil(speed_print * 45 / 45)