Cura/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_D.inst.cfg

[general]
version = 4
name = D
definition = strateo3d

[metadata]
setting_version = 20
type = quality
quality_type = d
weight = 1
material = emotiontech_abs
variant = Standard 1.0 Experimental

[values]
layer_height_0 = =round(0.5*machine_nozzle_size, 2)
line_width = =machine_nozzle_size/machine_nozzle_size*1.0
wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
wall_0_wipe_dist = =machine_nozzle_size/2
speed_print = 45
speed_wall = =math.ceil(speed_print * 37/45)
speed_wall_0 = =math.ceil(speed_wall * 30/37)
speed_topbottom = =math.ceil(speed_print * 35/45)
speed_layer_0 = =math.ceil(speed_print * 25/45)
speed_slowdown_layers = 2
cool_fan_enabled = True
cool_fan_speed = 35
cool_fan_speed_max = 100
cool_min_layer_time_fan_speed_max = 20
cool_min_layer_time = 11
cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
cool_min_speed = 10
support_angle = 50
material_print_temperature = =default_material_print_temperature + 3
material_print_temperature_layer_0 = =default_material_print_temperature
material_flow = 97
retraction_extra_prime_amount = 0.5
retraction_min_travel = =2*line_width
retraction_hop_only_when_collides = True
skin_overlap = 5
support_z_distance = =layer_height
support_bottom_distance = =layer_height
support_xy_distance = =line_width * 2
support_xy_distance_overhang = =wall_line_width_0
support_offset = 1
support_interface_density = 100
prime_tower_enable = True