liquid_vo0.8_PLA_Verydraft_Print.inst.cfg 1.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. [general]
  2. version = 4
  3. name = Extra Fast
  4. definition = liquid
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = verydraft
  9. weight = -3
  10. material = generic_pla
  11. variant = VO 0.8
  12. [values]
  13. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  14. cool_fan_speed_max = =100
  15. cool_min_speed = 2
  16. gradual_infill_step_height = =3 * layer_height
  17. infill_line_width = =round(line_width * 0.65 / 0.75, 2)
  18. line_width = =machine_nozzle_size * 0.9375
  19. machine_nozzle_cool_down_speed = 0.75
  20. machine_nozzle_heat_up_speed = 1.6
  21. material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
  22. material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
  23. material_print_temperature = =default_material_print_temperature + 10
  24. prime_tower_enable = True
  25. support_angle = 70
  26. support_line_width = =line_width * 0.75
  27. support_xy_distance = =wall_line_width_0 * 1.5
  28. top_bottom_thickness = =layer_height * 4
  29. wall_line_width = =round(line_width * 0.75 / 0.75, 2)
  30. wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
  31. wall_thickness = =wall_line_width_0 + wall_line_width_x
  32. retract_at_layer_change = False
  33. speed_print = 45
  34. speed_topbottom = =math.ceil(speed_print * 35 / 45)
  35. speed_wall = =math.ceil(speed_print * 40 / 45)
  36. speed_wall_x = =speed_wall
  37. speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
  38. infill_sparse_density = 15
  39. layer_height_0 = 0.4