flsun_sr_fine.inst.cfg 2.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = flsun_sr
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = fine
  9. weight = 1
  10. global_quality = True
  11. [values]
  12. layer_height = 0.12
  13. layer_height_0 = 0.2
  14. retraction_combing = noskin
  15. retraction_combing_max_distance = 10
  16. speed_slowdown_layers = 5
  17. travel_retract_before_outer_wall = False
  18. adhesion_type = skirt
  19. skirt_line_count = 2
  20. brim_width = 4.0
  21. cool_fan_speed = 100
  22. cool_lift_head = False
  23. cool_min_layer_time = 4
  24. infill_before_walls = False
  25. infill_enable_travel_optimization = False
  26. infill_support_angle = 50
  27. ironing_enabled = False
  28. retract_at_layer_change = False
  29. retraction_amount = 6.5
  30. retraction_hop_only_when_collides = True
  31. skin_no_small_gaps_heuristic = True
  32. skin_overlap = 10
  33. small_hole_max_size = 5
  34. speed_support = 80
  35. support_enable = True
  36. support_type = everywhere
  37. support_wall_count = 1
  38. support_angle = 60
  39. support_brim_enable = True
  40. support_brim_width = 4.0
  41. support_interface_density = 60
  42. support_interface_enable = True
  43. support_interface_height = 0.96
  44. support_interface_pattern = grid
  45. support_interface_skip_height = 0.12
  46. support_roof_density = 60
  47. support_xy_distance = 0.5
  48. support_z_distance = 0.2
  49. top_bottom_thickness = =layer_height*7
  50. travel_avoid_other_parts = True
  51. travel_avoid_supports = True
  52. acceleration_enabled = False
  53. jerk_enabled = False
  54. infill_pattern = grid
  55. ironing_only_highest_layer = True
  56. jerk_travel = 25
  57. jerk_travel_layer_0 = 20
  58. jerk_wall_0 = 10
  59. material_flow_dependent_temperature = False
  60. material_initial_print_temperature = 210
  61. material_final_print_temperature = 210
  62. material_print_temperature = 210
  63. material_print_temperature_layer_0 = 210
  64. material_bed_temperature_layer_0 = 60
  65. optimize_wall_printing_order = True
  66. retraction_hop = 0.3
  67. retraction_hop_enabled = True
  68. retraction_speed = 40
  69. small_feature_speed_factor = 60
  70. speed_infill = 100
  71. speed_layer_0 = 25
  72. speed_print = 80
  73. speed_topbottom = 50
  74. speed_travel = 120
  75. speed_travel_layer_0 = 40
  76. speed_z_hop = 50
  77. wall_thickness = =line_width*3
  78. z_seam_corner = z_seam_corner_inner
  79. z_seam_type = sharpest_corner