ultimaker_original_dual.def.json 3.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475
  1. {
  2. "version": 2,
  3. "name": "Ultimaker Original Dual Extrusion",
  4. "inherits": "ultimaker",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Ultimaker",
  8. "manufacturer": "Ultimaker B.V.",
  9. "weight": 4,
  10. "file_formats": "text/x-gcode",
  11. "platform": "ultimaker_platform.3mf",
  12. "has_materials": true,
  13. "has_machine_quality": true,
  14. "quality_definition": "ultimaker_original",
  15. "exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ],
  16. "machine_extruder_trains":
  17. {
  18. "0": "ultimaker_original_dual_1st",
  19. "1": "ultimaker_original_dual_2nd"
  20. },
  21. "firmware_file": "MarlinUltimaker-{baudrate}-dual.hex",
  22. "firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}-dual.hex",
  23. "first_start_actions": ["UMOUpgradeSelection", "BedLevel"],
  24. "supported_actions": ["UMOUpgradeSelection", "BedLevel"]
  25. },
  26. "overrides": {
  27. "machine_name": { "default_value": "Ultimaker Original" },
  28. "machine_width": {
  29. "default_value": 205
  30. },
  31. "machine_height": {
  32. "default_value": 200
  33. },
  34. "machine_depth": {
  35. "default_value": 195
  36. },
  37. "machine_center_is_zero": {
  38. "default_value": false
  39. },
  40. "machine_head_with_fans_polygon":
  41. {
  42. "default_value": [
  43. [ -75, 35 ],
  44. [ -75, -18 ],
  45. [ 18, 35 ],
  46. [ 18, -18 ]
  47. ]
  48. },
  49. "gantry_height": {
  50. "value": "55"
  51. },
  52. "machine_use_extruder_offset_to_offset_coords": {
  53. "default_value": true
  54. },
  55. "machine_gcode_flavor": {
  56. "default_value": "RepRap (Marlin/Sprinter)"
  57. },
  58. "machine_start_gcode": {
  59. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
  60. },
  61. "machine_end_gcode": {
  62. "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
  63. },
  64. "machine_extruder_count": {
  65. "default_value": 2
  66. },
  67. "prime_tower_position_x": {
  68. "value": "195"
  69. },
  70. "prime_tower_position_y": {
  71. "value": "149"
  72. }
  73. }
  74. }