skriware_2.def.json 19 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726
  1. {
  2. "name": "Skriware 2",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Skriware",
  8. "manufacturer": "Skriware",
  9. "file_formats": "text/x-gcode",
  10. "platform_offset": [
  11. 0,
  12. 0,
  13. 0
  14. ],
  15. "supports_usb_connection": false,
  16. "platform": "skriware_2_platform.3mf",
  17. "machine_extruder_trains": {
  18. "0": "skriware_2_extruder_0",
  19. "1": "skriware_2_extruder_1"
  20. }
  21. },
  22. "overrides": {
  23. "raft_interface_thickness": {
  24. "value": "0.2"
  25. },
  26. "wipe_retraction_prime_speed": {
  27. "value": "30"
  28. },
  29. "support_skip_zag_per_mm": {
  30. "default_value": 10
  31. },
  32. "material_bed_temperature": {
  33. "value": "50"
  34. },
  35. "raft_airgap": {
  36. "default_value": 0.2
  37. },
  38. "top_layers": {
  39. "value": "4"
  40. },
  41. "machine_extruder_count": {
  42. "default_value": 2
  43. },
  44. "raft_surface_acceleration": {
  45. "value": "400"
  46. },
  47. "meshfix_maximum_travel_resolution": {
  48. "value": "0.8"
  49. },
  50. "machine_end_gcode": {
  51. "default_value": "M59\nG92 E0\nG1 E-10 F300\nM104 T0 S0\nM104 T1 S0\nM140 S0\nG28 X0 Y0\nM84\nM106 S0\nM107"
  52. },
  53. "wall_material_flow": {
  54. "value": "99"
  55. },
  56. "raft_interface_jerk": {
  57. "value": "10"
  58. },
  59. "acceleration_topbottom": {
  60. "value": "400"
  61. },
  62. "prime_tower_size": {
  63. "default_value": 1
  64. },
  65. "max_skin_angle_for_expansion": {
  66. "default_value": 50
  67. },
  68. "raft_acceleration": {
  69. "value": "400"
  70. },
  71. "support_xy_distance": {
  72. "default_value": 0.6
  73. },
  74. "xy_offset_layer_0": {
  75. "value": "-0.16"
  76. },
  77. "raft_interface_fan_speed": {
  78. "value": "40"
  79. },
  80. "retraction_speed": {
  81. "default_value": 30
  82. },
  83. "speed_print": {
  84. "default_value": 20
  85. },
  86. "travel_avoid_supports": {
  87. "default_value": true
  88. },
  89. "infill_overlap_mm": {
  90. "value": "0.0"
  91. },
  92. "support_roof_height": {
  93. "value": "0.4"
  94. },
  95. "speed_travel_layer_0": {
  96. "value": "120"
  97. },
  98. "speed_wall_0": {
  99. "value": "20"
  100. },
  101. "acceleration_wall_x": {
  102. "value": "400"
  103. },
  104. "layer_0_z_overlap": {
  105. "value": "0.1"
  106. },
  107. "switch_extruder_retraction_speed": {
  108. "value": "30"
  109. },
  110. "travel_compensate_overlapping_walls_enabled": {
  111. "default_value": false
  112. },
  113. "raft_base_acceleration": {
  114. "value": "400"
  115. },
  116. "raft_base_speed": {
  117. "value": "60"
  118. },
  119. "wall_0_material_flow": {
  120. "value": "99"
  121. },
  122. "support_infill_rate": {
  123. "value": "20"
  124. },
  125. "raft_surface_layers": {
  126. "default_value": 1
  127. },
  128. "machine_height": {
  129. "default_value": 210
  130. },
  131. "retraction_prime_speed": {
  132. "value": "60"
  133. },
  134. "support_interface_material_flow": {
  135. "value": "99"
  136. },
  137. "raft_surface_fan_speed": {
  138. "value": "80"
  139. },
  140. "raft_base_line_width": {
  141. "value": "0.4"
  142. },
  143. "infill_line_distance": {
  144. "value": "5.33"
  145. },
  146. "default_material_print_temperature": {
  147. "default_value": 200
  148. },
  149. "speed_roofing": {
  150. "value": "20"
  151. },
  152. "skin_material_flow": {
  153. "value": "99"
  154. },
  155. "cool_fan_full_layer": {
  156. "value": "1"
  157. },
  158. "material_break_preparation_temperature": {
  159. "value": "195"
  160. },
  161. "support_roof_density": {
  162. "value": "70"
  163. },
  164. "support_infill_sparse_thickness": {
  165. "value": "0.2"
  166. },
  167. "retraction_retract_speed": {
  168. "value": "30"
  169. },
  170. "speed_slowdown_layers": {
  171. "default_value": 1
  172. },
  173. "support_line_distance": {
  174. "value": "2"
  175. },
  176. "cool_lift_head": {
  177. "default_value": true
  178. },
  179. "min_skin_width_for_expansion": {
  180. "value": "0.67"
  181. },
  182. "cool_min_speed": {
  183. "default_value": 5
  184. },
  185. "switch_extruder_retraction_speeds": {
  186. "default_value": 30
  187. },
  188. "raft_base_line_spacing": {
  189. "value": "0.8"
  190. },
  191. "speed_support": {
  192. "value": "50"
  193. },
  194. "skirt_brim_material_flow": {
  195. "value": "99"
  196. },
  197. "speed_infill": {
  198. "value": "80"
  199. },
  200. "support_initial_layer_line_distance": {
  201. "value": "2"
  202. },
  203. "support_use_towers": {
  204. "default_value": false
  205. },
  206. "skin_no_small_gaps_heuristic": {
  207. "default_value": true
  208. },
  209. "acceleration_roofing": {
  210. "value": "400"
  211. },
  212. "material_initial_print_temperature": {
  213. "value": "195"
  214. },
  215. "material_diameter": {
  216. "default_value": 1.75
  217. },
  218. "xy_offset": {
  219. "default_value": -0.16
  220. },
  221. "support_extruder_nr": {
  222. "value": "0"
  223. },
  224. "support_brim_line_count": {
  225. "value": "16"
  226. },
  227. "support_interface_extruder_nr": {
  228. "value": "0"
  229. },
  230. "support_roof_extruder_nr": {
  231. "value": "0"
  232. },
  233. "material_adhesion_tendency": {
  234. "default_value": 0
  235. },
  236. "material_standby_temperature": {
  237. "default_value": 195
  238. },
  239. "cool_fan_speed_0": {
  240. "default_value": 100
  241. },
  242. "brim_line_count": {
  243. "value": "17"
  244. },
  245. "adhesion_type": {
  246. "default_value": "raft"
  247. },
  248. "switch_extruder_retraction_amount": {
  249. "value": "16"
  250. },
  251. "retraction_amount": {
  252. "default_value": 3
  253. },
  254. "acceleration_travel": {
  255. "value": "400"
  256. },
  257. "jerk_print_layer_0": {
  258. "value": "10"
  259. },
  260. "raft_surface_thickness": {
  261. "value": "0.2"
  262. },
  263. "raft_base_jerk": {
  264. "value": "10"
  265. },
  266. "bottom_thickness": {
  267. "value": "0.8"
  268. },
  269. "roofing_material_flow": {
  270. "value": "99"
  271. },
  272. "top_skin_expand_distance": {
  273. "value": "0.8"
  274. },
  275. "speed_wall_x": {
  276. "value": "20"
  277. },
  278. "support_enable": {
  279. "default_value": true
  280. },
  281. "acceleration_print_layer_0": {
  282. "value": "400"
  283. },
  284. "jerk_prime_tower": {
  285. "value": "5"
  286. },
  287. "infill_before_walls": {
  288. "default_value": false
  289. },
  290. "raft_interface_line_spacing": {
  291. "value": "0.4"
  292. },
  293. "gantry_height": {
  294. "value": "210"
  295. },
  296. "material_print_temperature_layer_0": {
  297. "value": "195"
  298. },
  299. "raft_interface_line_width": {
  300. "value": "0.4"
  301. },
  302. "skirt_brim_line_width": {
  303. "value": "0.5"
  304. },
  305. "z_seam_y": {
  306. "value": "180"
  307. },
  308. "roofing_layer_count": {
  309. "value": "1"
  310. },
  311. "raft_margin": {
  312. "default_value": 4
  313. },
  314. "cool_fan_full_at_height": {
  315. "value": "0"
  316. },
  317. "acceleration_support_interface": {
  318. "value": "250"
  319. },
  320. "retraction_min_travel": {
  321. "value": "1"
  322. },
  323. "acceleration_layer_0": {
  324. "value": "400"
  325. },
  326. "support_z_distance": {
  327. "default_value": 0.2
  328. },
  329. "machine_heated_bed": {
  330. "default_value": true
  331. },
  332. "raft_jerk": {
  333. "value": "10"
  334. },
  335. "raft_surface_speed": {
  336. "value": "60"
  337. },
  338. "initial_layer_line_width_factor": {
  339. "default_value": 120
  340. },
  341. "machine_start_gcode": {
  342. "default_value": "G90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM420 S1 Z0.6 ;enable bed levelling\nG1 Z10 F250 ;move the platform down 10mm\nM107 ;fan off\nM42 P11 S255 ;turn on front fan\nM140 S{material_bed_temperature}\nM104 T0 S{material_print_temperature, 0}\nM104 T1 S{material_print_temperature, 1}\nG1 F2500 Y260 X0\nM190 S{material_bed_temperature}\nM109 T0 S{material_print_temperature, 0}\nM109 T1 S{material_print_temperature, 1}\nM60 ;enable E-FADE Algorithm\nM62 A ;filament sensor off\nG92 E0 ;zero the extruded length\nT1\nG92 E0;zero the extruded length\nG1 F300 Z0.3\nG1 F1200 X20\nG1 F1200 X180 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E11\nG1 F300 Z1.5\nG92 E0 ;zero the extruded length again\nT0\nG92 E0 ;zero the extruded length\nG1 F1200 Y258\nG1 F300 Z0.3\nG1 F1200 X40 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E11\nG1 Z1.5\nM61 A ;filament sensor reset\nM63 A ;filament sensor on\nG92 E0 ;zero the extruded length again\nM58 ;end of Start G-Code and signal retract management\nT{initial_extruder_nr}"
  343. },
  344. "bottom_skin_preshrink": {
  345. "value": "0.8"
  346. },
  347. "ironing_inset": {
  348. "value": "0.2 + (ironing_line_spacing - skin_line_width * (1.0 + ironing_flow / 100) / 2 if ironing_pattern == 'concentric' else skin_line_width * (1.0 - ironing_flow / 100) / 2)"
  349. },
  350. "jerk_travel": {
  351. "value": "10"
  352. },
  353. "machine_depth": {
  354. "default_value": 260
  355. },
  356. "jerk_skirt_brim": {
  357. "value": "5"
  358. },
  359. "infill_wipe_dist": {
  360. "value": "0"
  361. },
  362. "raft_interface_acceleration": {
  363. "value": "400"
  364. },
  365. "z_seam_x": {
  366. "value": "115"
  367. },
  368. "material_print_temperature": {
  369. "value": "195"
  370. },
  371. "material_bed_temperature_layer_0": {
  372. "value": "50"
  373. },
  374. "wipe_retraction_retract_speed": {
  375. "value": "30"
  376. },
  377. "jerk_travel_layer_0": {
  378. "value": "10"
  379. },
  380. "infill_overlap": {
  381. "value": "0"
  382. },
  383. "acceleration_support_infill": {
  384. "value": "400"
  385. },
  386. "travel_compensate_overlapping_walls_0_enabled": {
  387. "value": "False"
  388. },
  389. "support_bottom_material_flow": {
  390. "value": "99"
  391. },
  392. "jerk_support_roof": {
  393. "value": "5"
  394. },
  395. "wall_x_material_flow": {
  396. "value": "99"
  397. },
  398. "speed_support_interface": {
  399. "value": "33.33"
  400. },
  401. "jerk_layer_0": {
  402. "value": "10"
  403. },
  404. "support_angle": {
  405. "default_value": 60
  406. },
  407. "infill_sparse_thickness": {
  408. "value": "0.2"
  409. },
  410. "prime_tower_position_y": {
  411. "value": "1"
  412. },
  413. "retraction_combing": {
  414. "default_value": "infill"
  415. },
  416. "acceleration_prime_tower": {
  417. "value": "250"
  418. },
  419. "acceleration_print": {
  420. "default_value": 400
  421. },
  422. "acceleration_infill": {
  423. "value": "500"
  424. },
  425. "bridge_wall_speed": {
  426. "value": "10.0"
  427. },
  428. "acceleration_wall_0": {
  429. "value": "400"
  430. },
  431. "support_offset": {
  432. "default_value": 0.2
  433. },
  434. "build_volume_temperature": {
  435. "default_value": 28
  436. },
  437. "switch_extruder_prime_speed": {
  438. "value": "60"
  439. },
  440. "speed_prime_tower": {
  441. "value": "20"
  442. },
  443. "top_skin_preshrink": {
  444. "value": "0.8"
  445. },
  446. "jerk_ironing": {
  447. "value": "5"
  448. },
  449. "skin_outline_count": {
  450. "value": 0
  451. },
  452. "skirt_brim_speed": {
  453. "value": "10.0"
  454. },
  455. "raft_base_thickness": {
  456. "value": "0.2"
  457. },
  458. "infill_sparse_density": {
  459. "default_value": 15
  460. },
  461. "support_bottom_extruder_nr": {
  462. "value": "0"
  463. },
  464. "support_material_flow": {
  465. "value": "98"
  466. },
  467. "min_infill_area": {
  468. "default_value": 1
  469. },
  470. "jerk_support": {
  471. "value": "10"
  472. },
  473. "bottom_skin_expand_distance": {
  474. "value": "0.8"
  475. },
  476. "retract_at_layer_change": {
  477. "default_value": true
  478. },
  479. "jerk_support_interface": {
  480. "value": "5"
  481. },
  482. "jerk_support_bottom": {
  483. "value": "5"
  484. },
  485. "optimize_wall_printing_order": {
  486. "default_value": true
  487. },
  488. "skirt_brim_minimal_length": {
  489. "default_value": 50
  490. },
  491. "jerk_support_infill": {
  492. "value": "10"
  493. },
  494. "initial_bottom_layers": {
  495. "value": "3"
  496. },
  497. "prime_tower_position_x": {
  498. "value": "1"
  499. },
  500. "acceleration_support_bottom": {
  501. "value": "250"
  502. },
  503. "speed_support_roof": {
  504. "value": "33.33"
  505. },
  506. "speed_support_infill": {
  507. "value": "80"
  508. },
  509. "bridge_skin_speed_2": {
  510. "value": "15"
  511. },
  512. "raft_fan_speed": {
  513. "default_value": 100
  514. },
  515. "wipe_retraction_amount": {
  516. "value": "3"
  517. },
  518. "skin_edge_support_thickness": {
  519. "value": "0"
  520. },
  521. "bottom_layers": {
  522. "value": "3"
  523. },
  524. "retraction_extrusion_window": {
  525. "value": "3"
  526. },
  527. "acceleration_ironing": {
  528. "value": "250"
  529. },
  530. "support_top_distance": {
  531. "value": "0.2"
  532. },
  533. "travel_retract_before_outer_wall": {
  534. "default_value": true
  535. },
  536. "material_flow": {
  537. "default_value": 99
  538. },
  539. "support_bottom_distance": {
  540. "value": "0.2"
  541. },
  542. "expand_skins_expand_distance": {
  543. "value": "0.8"
  544. },
  545. "jerk_wall": {
  546. "value": "10"
  547. },
  548. "support_zag_skip_count": {
  549. "value": "8"
  550. },
  551. "connect_infill_polygons": {
  552. "value": "False"
  553. },
  554. "acceleration_skirt_brim": {
  555. "value": "250"
  556. },
  557. "z_seam_corner": {
  558. "default_value": "z_seam_corner_weighted"
  559. },
  560. "raft_surface_jerk": {
  561. "value": "10"
  562. },
  563. "cross_infill_pocket_size": {
  564. "value": "5.33"
  565. },
  566. "support_infill_extruder_nr": {
  567. "value": "0"
  568. },
  569. "acceleration_enabled": {
  570. "default_value": true
  571. },
  572. "jerk_wall_x": {
  573. "value": "10"
  574. },
  575. "skin_overlap": {
  576. "value": "15"
  577. },
  578. "infill_material_flow": {
  579. "value": "99"
  580. },
  581. "speed_equalize_flow_max": {
  582. "default_value": 40
  583. },
  584. "skin_preshrink": {
  585. "value": "0.8"
  586. },
  587. "speed_wall": {
  588. "value": "20"
  589. },
  590. "support_tree_collision_resolution": {
  591. "value": "0.2"
  592. },
  593. "meshfix_maximum_deviation": {
  594. "default_value": 0.003
  595. },
  596. "jerk_roofing": {
  597. "value": "10"
  598. },
  599. "fill_outline_gaps": {
  600. "default_value": true
  601. },
  602. "layer_height": {
  603. "default_value": 0.2
  604. },
  605. "remove_empty_first_layers": {
  606. "default_value": false
  607. },
  608. "prime_tower_flow": {
  609. "value": "99"
  610. },
  611. "support_roof_line_distance": {
  612. "value": "0.57"
  613. },
  614. "wipe_retraction_speed": {
  615. "value": "30"
  616. },
  617. "support_extruder_nr_layer_0": {
  618. "value": "0"
  619. },
  620. "layer_height_0": {
  621. "default_value": 0.2
  622. },
  623. "multiple_mesh_overlap": {
  624. "default_value": 0
  625. },
  626. "ooze_shield_dist": {
  627. "default_value": 4
  628. },
  629. "jerk_enabled": {
  630. "default_value": true
  631. },
  632. "acceleration_support": {
  633. "value": "400"
  634. },
  635. "adhesion_extruder_nr": {
  636. "value": "0"
  637. },
  638. "skirt_line_count": {
  639. "default_value": 2
  640. },
  641. "travel_compensate_overlapping_walls_x_enabled": {
  642. "value": "False"
  643. },
  644. "jerk_wall_0": {
  645. "value": "10"
  646. },
  647. "raft_speed": {
  648. "value": "60"
  649. },
  650. "speed_layer_0": {
  651. "value": "10.0"
  652. },
  653. "machine_width": {
  654. "default_value": 210
  655. },
  656. "acceleration_wall": {
  657. "value": "400"
  658. },
  659. "jerk_infill": {
  660. "value": "10"
  661. },
  662. "wipe_hop_enable": {
  663. "value": "False"
  664. },
  665. "acceleration_travel_layer_0": {
  666. "value": "400"
  667. },
  668. "raft_interface_speed": {
  669. "value": "60"
  670. },
  671. "skin_edge_support_layers": {
  672. "value": "0"
  673. },
  674. "support_xy_distance_overhang": {
  675. "value": "0.5"
  676. },
  677. "brim_width": {
  678. "default_value": 10
  679. },
  680. "coasting_enable": {
  681. "default_value": true
  682. },
  683. "jerk_print": {
  684. "default_value": 10
  685. },
  686. "acceleration_support_roof": {
  687. "value": "250"
  688. },
  689. "prime_tower_min_volume": {
  690. "default_value": 4
  691. },
  692. "support_roof_material_flow": {
  693. "value": "99"
  694. },
  695. "wall_0_wipe_dist": {
  696. "value": "0"
  697. },
  698. "jerk_topbottom": {
  699. "value": "10"
  700. },
  701. "retraction_count_max": {
  702. "default_value": 30
  703. },
  704. "skin_overlap_mm": {
  705. "value": "0.06"
  706. },
  707. "extruders_enabled_count": {
  708. "value": "2"
  709. },
  710. "speed_support_bottom": {
  711. "value": "33.33"
  712. },
  713. "support_skip_some_zags": {
  714. "default_value": true
  715. },
  716. "ooze_shield_angle": {
  717. "default_value": 50
  718. },
  719. "wall_thickness": {
  720. "value": "1.2"
  721. },
  722. "speed_print_layer_0": {
  723. "value": "10.0"
  724. }
  725. }
  726. }