rigid3d_3rdgen.def.json 1.4 KB

123456789101112131415161718192021222324252627282930313233
  1. {
  2. "name": "Rigid3D 3. Nesil",
  3. "version": 2,
  4. "inherits": "rigid3d_base",
  5. "metadata": {
  6. "visible": true,
  7. "quality_definition": "rigid3d_base",
  8. "preferred_quality_type": "standard"
  9. },
  10. "overrides": {
  11. "machine_name": { "default_value": "Rigid3D 3. Nesil" },
  12. "machine_heated_bed": { "default_value": true },
  13. "machine_width": { "default_value": 270 },
  14. "machine_depth": { "default_value": 290 },
  15. "machine_height": { "default_value": 240 },
  16. "machine_center_is_zero": { "default_value": false },
  17. "machine_start_gcode": {"default_value": " ; -- START GCODE --\n G21\n G28 ; Home extruder\n G29 ; Autolevel bed\n M107 ; Turn off fan\n G90 ; Absolute positioning\n M82 ; Extruder in absolute mode\n G92 E0 ; Reset extruder position\n ; -- end of START GCODE --\n\n"},
  18. "machine_end_gcode": {"default_value": " ; -- END GCODE --\n G1 X0 Y230 ; Get extruder out of way.\n M107 ; Turn off fan\n G91 ; Relative positioning\n G0 Z20 ; Lift extruder up\n T0\n G1 E-1 ; Reduce filament pressure\n M104 T0 S0 ; Turn extruder heater off\n G90 ; Absolute positioning\n G92 E0 ; Reset extruder position\n M140 S0 ; Disable heated bed\n M84 ; Turn steppers off\n ; -- end of END GCODE --\n"},
  19. "machine_head_with_fans_polygon": {
  20. "default_value": [
  21. [ -18, -20], [ -18, 45], [ 32, -20], [ 32, 45]
  22. ]
  23. },
  24. "gantry_height": { "value": 20 }
  25. }
  26. }