| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657 |
- {
- "name": "BIQU B1",
- "version": 2,
- "inherits": "biqu_base",
- "metadata": {
- "quality_definition": "biqu_base",
- "visible": true,
- "has_machine_materials": true,
- "platform": "BIQU_SSS.stl",
- "platform_offset": [
- 0,
- -7.4,
- 5
- ]
- },
- "overrides": {
- "coasting_enable": { "default_value": true },
- "coasting_enable": { "value": true },
- "retraction_amount": { "default_value": 7 },
- "retraction_amount": { "value": 7 },
- "retraction_speed": { "default_value": 70 },
- "retraction_speed": { "value": 70 },
- "support_enable": { "default_value": true },
- "support_enable": { "value": true },
- "support_structure": { "default_value": "normal" },
- "support_structure": { "value": "normal" },
- "support_type": { "default_value": "buildplate" },
- "support_type": { "value": "buildplate" },
- "support_angle": { "default_value": 45 },
- "support_angle": { "value": 45 },
- "support_infill_rate": { "default_value": 15 },
- "support_infill_rate": { "value": 15 },
- "infill_overlap_mm": { "default_value": 0.06 },
- "infill_overlap_mm": { "value": 0.06 },
- "speed_print": { "default_value": 60 },
- "speed_print": { "value": 60 },
- "machine_name": { "default_value": "BIQU B1" },
- "machine_width": { "default_value": 235 },
- "machine_width": { "value": 235 },
- "machine_depth": { "default_value": 235 },
- "machine_depth": { "value": 235 },
- "machine_height": { "default_value": 270 },
- "machine_height": { "value": 270 },
- "machine_head_with_fans_polygon": { "default_value": [
- [-33, 35],
- [-33, -23],
- [33, -23],
- [33, 35]
- ]
- },
- "machine_start_gcode": {
- "default_value": " ; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nG92 E0 ; Reset Extruder\nM117 Homing axes\nG28 ; Home all axes\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0 ; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
- },
- "gantry_height": { "value": 27.5 }
- }
- }
|
