| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667 |
- [general]
- name = AA 0.8
- version = 4
- definition = ultimaker_s3
- [metadata]
- setting_version = 15
- type = variant
- hardware_type = nozzle
- [values]
- acceleration_enabled = True
- acceleration_print = 4000
- brim_width = 7
- cool_fan_speed = 7
- cool_fan_speed_max = 100
- cool_min_speed = 5
- default_material_print_temperature = 200
- infill_before_walls = False
- infill_line_width = =round(line_width * 0.6 / 0.7, 2)
- infill_overlap = 0
- infill_pattern = triangles
- infill_wipe_dist = 0
- jerk_enabled = True
- jerk_print = 25
- jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
- jerk_wall = =math.ceil(jerk_print * 25 / 25)
- jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
- layer_height = 0.2
- line_width = =machine_nozzle_size
- machine_min_cool_heat_time_window = 15
- machine_nozzle_cool_down_speed = 0.85
- machine_nozzle_heat_up_speed = 1.5
- machine_nozzle_id = AA 0.8
- machine_nozzle_size = 0.8
- machine_nozzle_tip_outer_diameter = 2.0
- material_final_print_temperature = =material_print_temperature - 10
- material_initial_print_temperature = =material_print_temperature - 5
- material_standby_temperature = 100
- multiple_mesh_overlap = 0
- prime_tower_enable = False
- prime_tower_wipe_enabled = True
- retract_at_layer_change = =not magic_spiralize
- retraction_amount = 6.5
- retraction_count_max = 25
- retraction_extrusion_window = 1
- retraction_hop = 2
- retraction_hop_only_when_collides = True
- retraction_min_travel = =line_width * 2
- skin_overlap = 5
- speed_equalize_flow_enabled = True
- speed_layer_0 = 20
- speed_print = 35
- speed_topbottom = =math.ceil(speed_print * 25 / 35)
- speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
- support_angle = 60
- support_bottom_distance = =support_z_distance / 2
- support_pattern = zigzag
- support_top_distance = =support_z_distance
- support_z_distance = =layer_height * 2
- switch_extruder_prime_speed = 20
- switch_extruder_retraction_amount = 16.5
- top_bottom_thickness = 1.4
- wall_0_inset = 0
- wall_line_width_0 = =wall_line_width
- wall_line_width_x = =wall_line_width
- wall_thickness = 2
|
