ultimaker_original.def.json 2.9 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364
  1. {
  2. "version": 2,
  3. "name": "Ultimaker Original",
  4. "inherits": "ultimaker",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Ultimaker",
  8. "manufacturer": "Ultimaker B.V.",
  9. "weight": 4,
  10. "file_formats": "text/x-gcode",
  11. "platform": "ultimaker_platform.stl",
  12. "has_materials": true,
  13. "has_machine_quality": true,
  14. "exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ],
  15. "first_start_actions": ["UMOUpgradeSelection", "BedLevel"],
  16. "supported_actions": ["UMOUpgradeSelection", "BedLevel"],
  17. "machine_extruder_trains":
  18. {
  19. "0": "ultimaker_original_extruder_0"
  20. },
  21. "firmware_file": "MarlinUltimaker-{baudrate}.hex",
  22. "firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}.hex"
  23. },
  24. "overrides": {
  25. "machine_name": { "default_value": "Ultimaker Original" },
  26. "machine_width": {
  27. "default_value": 205
  28. },
  29. "machine_height": {
  30. "default_value": 200
  31. },
  32. "machine_depth": {
  33. "default_value": 205
  34. },
  35. "machine_center_is_zero": {
  36. "default_value": false
  37. },
  38. "machine_head_with_fans_polygon":
  39. {
  40. "default_value": [
  41. [ -75, 35 ],
  42. [ -75, -18 ],
  43. [ 18, 35 ],
  44. [ 18, -18 ]
  45. ]
  46. },
  47. "gantry_height": {
  48. "value": "55"
  49. },
  50. "machine_use_extruder_offset_to_offset_coords": {
  51. "default_value": true
  52. },
  53. "machine_gcode_flavor": {
  54. "default_value": "RepRap (Marlin/Sprinter)"
  55. },
  56. "machine_start_gcode": {
  57. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
  58. },
  59. "machine_end_gcode": {
  60. "value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'"
  61. }
  62. }
  63. }