ultimaker2.def.json 4.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990
  1. {
  2. "version": 2,
  3. "name": "Ultimaker 2",
  4. "inherits": "ultimaker",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Ultimaker",
  8. "manufacturer": "Ultimaker B.V.",
  9. "weight": 3,
  10. "file_formats": "text/x-gcode",
  11. "platform": "ultimaker2_platform.obj",
  12. "platform_texture": "Ultimaker2backplate.png",
  13. "platform_offset": [9, 0, 0],
  14. "has_materials": false,
  15. "has_machine_quality": true,
  16. "preferred_variant_name": "0.4 mm",
  17. "machine_extruder_trains":
  18. {
  19. "0": "ultimaker2_extruder_0"
  20. },
  21. "firmware_file": "MarlinUltimaker2.hex"
  22. },
  23. "overrides": {
  24. "machine_name": { "default_value": "Ultimaker 2" },
  25. "machine_start_gcode" : {
  26. "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E10 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\""
  27. },
  28. "machine_end_gcode" : {
  29. "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\""
  30. },
  31. "machine_width": {
  32. "default_value": 223
  33. },
  34. "machine_depth": {
  35. "default_value": 223
  36. },
  37. "machine_height": {
  38. "default_value": 205
  39. },
  40. "machine_heated_bed": {
  41. "default_value": true
  42. },
  43. "machine_head_with_fans_polygon":
  44. {
  45. "default_value": [
  46. [ -42, 12 ],
  47. [ -42, -32 ],
  48. [ 62, 12 ],
  49. [ 62, -32 ]
  50. ]
  51. },
  52. "machine_center_is_zero": {
  53. "default_value": false
  54. },
  55. "gantry_height": {
  56. "value": "48"
  57. },
  58. "machine_use_extruder_offset_to_offset_coords": {
  59. "default_value": true
  60. },
  61. "machine_gcode_flavor": {
  62. "default_value": "UltiGCode"
  63. },
  64. "machine_disallowed_areas": {
  65. "default_value": [
  66. [[-115, 112.5], [ -82, 112.5], [ -84, 102.5], [-115, 102.5]],
  67. [[ 115, 112.5], [ 115, 102.5], [ 110, 102.5], [ 108, 112.5]],
  68. [[-115, -112.5], [-115, -104.5], [ -84, -104.5], [ -82, -112.5]],
  69. [[ 115, -112.5], [ 108, -112.5], [ 110, -104.5], [ 115, -104.5]]
  70. ]},
  71. "machine_nozzle_tip_outer_diameter": {
  72. "default_value": 1
  73. },
  74. "machine_nozzle_head_distance": {
  75. "default_value": 3
  76. },
  77. "machine_max_feedrate_x": {
  78. "default_value": 300
  79. },
  80. "machine_max_feedrate_y": {
  81. "default_value": 300
  82. },
  83. "machine_max_feedrate_z": {
  84. "default_value": 40
  85. },
  86. "machine_acceleration": {
  87. "default_value": 3000
  88. }
  89. }
  90. }