| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455 |
- {
- "version": 2,
- "name": "Prusa i3",
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Quillford",
- "manufacturer": "Prusa3D",
- "file_formats": "text/x-gcode",
- "platform": "prusai3_platform.stl",
- "machine_extruder_trains":
- {
- "0": "prusa_i3_extruder_0"
- }
- },
- "overrides": {
- "machine_name": { "default_value": "Prusa i3" },
- "machine_heated_bed": {
- "default_value": true
- },
- "machine_width": {
- "default_value": 200
- },
- "machine_height": {
- "default_value": 200
- },
- "machine_depth": {
- "default_value": 200
- },
- "machine_center_is_zero": {
- "default_value": false
- },
- "machine_head_with_fans_polygon": {
- "default_value": [
- [-75, -18],
- [-75, 35],
- [18, 35],
- [18, -18]
- ]
- },
- "gantry_height": {
- "value": "55"
- },
- "machine_gcode_flavor": {
- "default_value": "RepRap (Marlin/Sprinter)"
- },
- "machine_start_gcode": {
- "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
- },
- "machine_end_gcode": {
- "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
- }
- }
- }
|
