innovo_inventor.def.json 2.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071
  1. {
  2. "version": 2,
  3. "name": "Innovo INVENTOR",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Adam Rumjahn",
  8. "manufacturer": "Innovo",
  9. "file_formats": "text/x-gcode",
  10. "platform": "inventor_platform.stl",
  11. "platform_offset": [-180, -0.25, 160],
  12. "machine_extruder_trains":
  13. {
  14. "0": "innovo_inventor_extruder_0"
  15. }
  16. },
  17. "overrides": {
  18. "machine_name": { "default_value": "Innovo INVENTOR" },
  19. "machine_width": {
  20. "default_value": 340
  21. },
  22. "machine_height": {
  23. "default_value": 290
  24. },
  25. "machine_depth": {
  26. "default_value": 300
  27. },
  28. "machine_heated_bed": {
  29. "default_value": true
  30. },
  31. "machine_center_is_zero": {
  32. "default_value": true
  33. },
  34. "machine_head_with_fans_polygon": {
  35. "default_value": [
  36. [-43.7, -19.2],
  37. [-43.7, 55],
  38. [43.7, 55],
  39. [43.7, -19.2]
  40. ]
  41. },
  42. "gantry_height": {
  43. "value": "82.3"
  44. },
  45. "machine_gcode_flavor": {
  46. "default_value": "RepRap (Marlin/Sprinter)"
  47. },
  48. "machine_start_gcode": {
  49. "default_value": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM190 S{material_bed_temperature}\nM104 T0 S{material_print_temperature}\nM109 T0 S{material_print_temperature}\nM104 T1 S{material_print_temperature}\nM109 T1 S{material_print_temperature}\n;G32 S3 ; auto level\nG92 E0 ; Reset extruder position"
  50. },
  51. "machine_end_gcode": {
  52. "default_value": "M104 S0 ; turn off extruders\nM140 S0 ; heated bed heater off\nG91 ; relative positioning\nG1 E-2 F5000; retract 2mm\nG28 Z; move bed down\nG90 ; absolute positioning\nM84 ; disable motors"
  53. },
  54. "layer_height": {
  55. "default_value": 0.15
  56. },
  57. "wall_thickness": {
  58. "default_value": 0.8
  59. },
  60. "top_bottom_thickness": {
  61. "default_value": 1.2
  62. },
  63. "speed_print": {
  64. "default_value": 50
  65. },
  66. "speed_layer_0": {
  67. "minimum_value": 0.1
  68. }
  69. }
  70. }