helloBEEprusa.def.json 2.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. {
  2. "version": 2,
  3. "name": "Hello BEE Prusa",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "BEEVERYCREATIVE",
  8. "manufacturer": "BEEVERYCREATIVE",
  9. "platform": "BEEVERYCREATIVE-helloBEEprusa.stl",
  10. "platform_offset": [-226, -75, -196],
  11. "file_formats": "text/x-gcode",
  12. "machine_extruder_trains":
  13. {
  14. "0": "hBp_extruder_left",
  15. "1": "hBp_extruder_right"
  16. }
  17. },
  18. "overrides": {
  19. "machine_extruder_count": { "default_value": 2 },
  20. "machine_name": { "default_value": "hello BEE prusa" },
  21. "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM107 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG92 E0 ;zero the extruded length\nG1 F3600 ;set feedrate to 60 mm/sec\nM420 S1 \n; -- end of START GCODE --" },
  22. "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set bed temperature to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --" },
  23. "machine_width": { "default_value": 185 },
  24. "machine_depth": { "default_value": 200 },
  25. "machine_height": { "default_value": 190 },
  26. "machine_heated_bed": { "default_value": true },
  27. "machine_center_is_zero": { "default_value": false },
  28. "layer_height": { "default_value": 0.2 },
  29. "layer_height_0": { "default_value": 0.2 },
  30. "wall_thickness": { "default_value": 1.2 },
  31. "top_bottom_thickness": { "default_value": 1.2 },
  32. "infill_sparse_density": { "default_value": 20 },
  33. "speed_print": { "default_value": 60 },
  34. "skirt_line_count": { "default_value": 4 },
  35. "skirt_brim_minimal_length": { "default_value": 30 },
  36. "skirt_gap": { "default_value": 6 },
  37. "retraction_speed": { "default_value": 15.0},
  38. "retraction_amount": { "default_value": 1.5}
  39. }
  40. }