| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657 |
- [general]
- definition = ultimaker_methodx
- name = Fast
- version = 4
- [metadata]
- material = ultimaker_abscf_175
- quality_type = draft
- setting_version = 23
- type = quality
- variant = LABS
- weight = -2
- [values]
- cool_fan_enabled = =extruder_nr == support_extruder_nr
- cool_fan_full_layer = 3
- cool_fan_speed = 0
- cool_fan_speed_0 = 0
- cool_fan_speed_max = 100
- cool_min_layer_time = 6
- cool_min_layer_time_fan_speed_max = 11
- cool_min_speed = 6
- cool_min_temperature = 250
- raft_airgap = =0.15 if extruder_nr == support_extruder_nr else 0
- raft_base_wall_count = =2 if extruder_nr == support_extruder_nr else 1
- raft_surface_flow = =110 if extruder_nr == support_extruder_nr else 100
- raft_surface_speed = =90 if extruder_nr == support_extruder_nr else 50
- raft_surface_thickness = =0.25 if extruder_nr == support_extruder_nr else 0.2
- raft_surface_z_offset = =-0.075 if extruder_nr == support_extruder_nr else 0
- skin_overlap = 10
- speed_layer_0 = 35
- speed_prime_tower = 30.0
- speed_print = 120.0
- speed_roofing = 55
- speed_support = =speed_print
- speed_topbottom = 85
- speed_wall_0 = 45
- speed_wall_x = 65
- support_angle = 52
- support_bottom_density = 24
- support_bottom_distance = =layer_height
- support_bottom_enable = False
- support_bottom_line_width = 0.6
- support_bottom_stair_step_height = 0
- support_fan_enable = False
- support_infill_angles = [ 45,45,45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135,135,135]
- support_infill_rate = 15.0
- support_line_width = 0.35
- support_material_flow = 90
- support_roof_density = 82
- support_roof_line_width = 0.4
- support_xy_distance = 0.3
- support_xy_distance_overhang = 0.25
- support_z_distance = 0.15
- wall_overhang_angle = 30
- wall_overhang_speed_factor = 50
|
