um_methodx_1xa_um-asa-175_0.2mm.inst.cfg 1.8 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162
  1. [general]
  2. definition = ultimaker_methodx
  3. name = Fast
  4. version = 4
  5. [metadata]
  6. material = ultimaker_asa_175
  7. quality_type = draft
  8. setting_version = 23
  9. type = quality
  10. variant = 1XA
  11. weight = -2
  12. [values]
  13. cool_fan_enabled = =extruder_nr == support_extruder_nr
  14. cool_fan_full_layer = 3
  15. cool_fan_speed = 85.0
  16. cool_fan_speed_0 = 0
  17. cool_fan_speed_max = 100
  18. cool_min_layer_time = 10
  19. cool_min_layer_time_fan_speed_max = 15
  20. cool_min_speed = =round(speed_wall_0 * 3 / 4) if cool_lift_head else round(speed_wall_0 / 5)
  21. material_print_temperature_layer_0 = =default_material_print_temperature+5
  22. raft_airgap = =0.15 if extruder_nr == support_extruder_nr else 0
  23. raft_base_speed = 10
  24. raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.8
  25. raft_surface_speed = 90
  26. retraction_amount = 0.5
  27. retraction_min_travel = 3.2
  28. skin_overlap = 10
  29. small_skin_width = 3.6
  30. speed_layer_0 = 35
  31. speed_prime_tower = 30.0
  32. speed_print = 120.0
  33. speed_roofing = 65
  34. speed_support = =speed_print * 5/6
  35. speed_support_interface = 75
  36. speed_topbottom = 55
  37. speed_wall = 25
  38. speed_wall_0 = =speed_print * 1/6
  39. speed_wall_x = =speed_wall
  40. support_angle = 50
  41. support_bottom_density = 24
  42. support_bottom_distance = =layer_height
  43. support_bottom_enable = False
  44. support_bottom_line_width = 0.6
  45. support_bottom_stair_step_height = 0
  46. support_infill_angles = [45,45,45,45,45,45,45,45,45,45,135,135,135,135,135,135,135,135,135,135]
  47. support_infill_rate = 15.0
  48. support_line_width = 0.3
  49. support_material_flow = =0.85*material_flow
  50. support_roof_density = 85
  51. support_supported_skin_fan_speed = 60.0
  52. support_top_distance = =support_z_distance
  53. support_xy_distance = 0.35
  54. support_xy_distance_overhang = 0.25
  55. support_xy_overrides_z = xy_overrides_z
  56. support_z_distance = 0.15
  57. top_skin_expand_distance = 2.4
  58. wall_overhang_angle = 30
  59. wall_overhang_speed_factor = 40