um_method_1a_um-pla-175_0.2mm.inst.cfg 2.1 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071
  1. [general]
  2. definition = ultimaker_method
  3. name = Fast
  4. version = 4
  5. [metadata]
  6. material = ultimaker_pla_175
  7. quality_type = draft
  8. setting_version = 23
  9. type = quality
  10. variant = 1A
  11. weight = -2
  12. [values]
  13. bottom_layers = 4
  14. cool_fan_enabled = True
  15. cool_fan_full_layer = 4
  16. cool_fan_speed = 100
  17. cool_fan_speed_0 = 0
  18. cool_min_layer_time = 10
  19. cool_min_speed = 5
  20. cool_min_temperature = 205
  21. infill_sparse_density = 15
  22. material_final_print_temperature = =default_material_print_temperature - 5
  23. material_initial_print_temperature = =default_material_print_temperature - 5
  24. material_print_temperature_layer_0 = =default_material_print_temperature + 15
  25. min_bead_width = =line_width * 0.75
  26. min_wall_line_width = =line_width * 0.75
  27. raft_airgap = 0.18
  28. raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8
  29. raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4
  30. raft_base_thickness = 0.6
  31. raft_interface_infill_overlap = 25
  32. raft_interface_layers = 1
  33. raft_interface_line_spacing = 0.75
  34. raft_interface_speed = 60
  35. raft_interface_thickness = 0.2
  36. raft_speed = 15
  37. raft_surface_infill_overlap = 25
  38. raft_surface_line_spacing = 0.425
  39. raft_surface_line_width = 0.4
  40. raft_surface_speed = 90
  41. raft_surface_wall_count = 2
  42. speed_layer_0 = 15
  43. speed_print = 150
  44. speed_roofing = =speed_print / 3
  45. speed_support = =speed_print
  46. speed_support_interface = 65
  47. speed_topbottom = =speed_print * 0.6
  48. speed_wall = =speed_print / 6
  49. speed_wall_0 = =speed_wall
  50. speed_wall_x = =speed_wall
  51. support_angle = 50.0
  52. support_bottom_distance = =layer_height
  53. support_bottom_enable = False
  54. support_infill_angles = [45 ]
  55. support_infill_rate = 12
  56. support_interface_density = 83
  57. support_interface_height = =layer_height * 4
  58. support_interface_material_flow = =material_flow * 0.9
  59. support_line_width = =line_width * 0.75
  60. support_material_flow = =material_flow * 0.8
  61. support_offset = 3
  62. support_roof_density = =support_interface_density
  63. support_roof_line_width = =line_width
  64. support_top_distance = =support_z_distance
  65. support_xy_distance = 0.3
  66. support_xy_overrides_z = xy_overrides_z
  67. support_z_distance = 0.18
  68. switch_extruder_retraction_amount = 1