Cura/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg

[general]
definition = ultimaker_factor4
name = Fine
version = 4

[metadata]
material = generic_bam
quality_type = normal
setting_version = 23
type = quality
variant = AA 0.4
weight = 0

[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 35
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
gradual_flow_discretisation_step_size = 0.1
gradual_flow_enabled = True
machine_nozzle_heat_up_speed = 1.56
material_print_temperature = =default_material_print_temperature - 5
max_flow_acceleration = 1
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
skin_material_flow = =material_flow * 0.965
speed_print = 60
support_angle = 45
support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
support_interface_density = =min(extruderValues('material_surface_energy'))
support_interface_enable = True
support_join_distance = 5
support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height