Cura/resources/definitions/eazao_m600.def.json

{
    "version": 2,
    "name": "Eazao M600",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Eazao",
        "manufacturer": "Eazao",
        "file_formats": "text/x-gcode",
        "has_machine_quality": false,
        "has_materials": false,
        "machine_extruder_trains": { "0": "eazao_m600_extruder_0" },
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "acceleration_print": { "value": 300 },
        "acceleration_travel": { "value": 300 },
        "adhesion_type": { "default_value": "'none'" },
        "bottom_layers": { "value": 2 },
        "cool_fan_enabled": { "value": false },
        "infill_sparse_density": { "value": 0 },
        "initial_bottom_layers": { "value": 2 },
        "jerk_print": { "value": 10 },
        "jerk_travel": { "value": "jerk_print" },
        "jerk_travel_layer_0": { "value": "jerk_travel" },
        "layer_height": { "value": 1.0 },
        "layer_height_0": { "value": 1.0 },
        "line_width": { "value": 3.0 },
        "machine_acceleration": { "value": 300 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 420 },
        "machine_end_gcode": { "default_value": "G92 Z0\nG1 F1500 Z10\nG28 X0 Y400 ;move X Y to min endstops\nM82\nM84 ;steppers off\n" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_heated_bed": { "default_value": false },
        "machine_height": { "default_value": 620 },
        "machine_max_acceleration_e": { "value": 500 },
        "machine_max_acceleration_x": { "value": 500 },
        "machine_max_acceleration_y": { "value": 500 },
        "machine_max_acceleration_z": { "value": 50 },
        "machine_max_feedrate_e": { "value": 25 },
        "machine_max_feedrate_x": { "value": 100 },
        "machine_max_feedrate_y": { "value": 100 },
        "machine_max_feedrate_z": { "value": 5 },
        "machine_max_jerk_e": { "value": 5 },
        "machine_max_jerk_xy": { "value": 10 },
        "machine_max_jerk_z": { "value": 0.3 },
        "machine_name": { "default_value": "Eazao M600" },
        "machine_start_gcode": { "default_value": "G21 ;set units to millimeters\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 ;Home\nG1 Z25.0 F1500 ;move the platform down 15mm\nG92 E0 ;extruder reset\nG1 F300 E5\nG92 E0 ;The extruder is forced to zero again\nM302\nM163 S0 P0.87; Set Mix Factor\nM163 S1 P0.13; Set Mix Factor\nM164 S0" },
        "machine_width": { "default_value": 420 },
        "magic_spiralize": { "value": true },
        "material_final_print_temperature": { "value": "0" },
        "material_initial_print_temperature": { "value": "0" },
        "material_print_temperature": { "value": "0" },
        "material_print_temperature_layer_0": { "value": "0" },
        "optimize_wall_printing_order": { "value": "True" },
        "retraction_amount": { "value": 7 },
        "retraction_combing": { "value": "'noskin'" },
        "retraction_count_max": { "value": 100 },
        "retraction_enable": { "value": false },
        "retraction_extrusion_window": { "value": 10 },
        "retraction_hop": { "value": 0.2 },
        "speed_print": { "value": 20.0 },
        "speed_travel": { "value": 20.0 },
        "speed_wall": { "value": 20.0 },
        "speed_wall_0": { "value": 20.0 },
        "speed_wall_x": { "value": 20.0 },
        "speed_z_hop": { "value": "machine_max_feedrate_z" },
        "top_bottom_pattern": { "value": "concentric" },
        "top_bottom_thickness": { "value": 3 },
        "wall_thickness": { "value": 5.0 }
    }
}