advanced.cfg 2.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149
  1. [general]
  2. name = Advanced
  3. weight = 2
  4. version = 2
  5. [machine_settings]
  6. [resolution]
  7. layer_height
  8. layer_height_0
  9. line_width
  10. wall_line_width
  11. wall_line_width_0
  12. wall_line_width_x
  13. skin_line_width
  14. infill_line_width
  15. initial_layer_line_width_factor
  16. [shell]
  17. wall_extruder_nr
  18. wall_0_extruder_nr
  19. wall_x_extruder_nr
  20. wall_thickness
  21. wall_line_count
  22. optimize_wall_printing_order
  23. xy_offset
  24. [top_bottom]
  25. top_bottom_extruder_nr
  26. top_bottom_thickness
  27. top_thickness
  28. top_layers
  29. bottom_thickness
  30. bottom_layers
  31. ironing_enabled
  32. skin_monotonic
  33. small_skin_width
  34. small_skin_on_surface
  35. [infill]
  36. infill_extruder_nr
  37. infill_sparse_density
  38. infill_line_distance
  39. infill_pattern
  40. infill_multiplier
  41. infill_overlap
  42. infill_sparse_thickness
  43. gradual_infill_steps
  44. [material]
  45. material_print_temperature
  46. material_print_temperature_layer_0
  47. material_initial_print_temperature
  48. material_final_print_temperature
  49. material_bed_temperature
  50. material_bed_temperature_layer_0
  51. retraction_enable
  52. retract_at_layer_change
  53. retraction_amount
  54. retraction_speed
  55. material_standby_temperature
  56. [speed]
  57. speed_print
  58. speed_infill
  59. speed_wall
  60. speed_wall_0
  61. speed_wall_x
  62. speed_topbottom
  63. speed_support
  64. speed_prime_tower
  65. speed_travel
  66. speed_layer_0
  67. skirt_brim_speed
  68. acceleration_enabled
  69. jerk_enabled
  70. [travel]
  71. retraction_combing
  72. travel_avoid_other_parts
  73. travel_avoid_supports
  74. travel_avoid_distance
  75. retraction_hop_enabled
  76. retraction_hop_only_when_collides
  77. retraction_hop
  78. retraction_hop_after_extruder_switch
  79. [cooling]
  80. cool_fan_enabled
  81. cool_fan_speed
  82. cool_fan_speed_min
  83. cool_fan_speed_max
  84. cool_min_layer_time_fan_speed_max
  85. cool_fan_speed_0
  86. cool_fan_full_at_height
  87. cool_fan_full_layer
  88. cool_min_layer_time
  89. cool_min_speed
  90. cool_lift_head
  91. [support]
  92. support_enable
  93. support_extruder_nr
  94. support_infill_extruder_nr
  95. support_extruder_nr_layer_0
  96. support_interface_extruder_nr
  97. support_structure
  98. support_type
  99. support_angle
  100. support_pattern
  101. support_infill_rate
  102. support_offset
  103. support_infill_sparse_thickness
  104. gradual_support_infill_steps
  105. gradual_support_infill_step_height
  106. support_interface_enable
  107. support_roof_enable
  108. support_bottom_enable
  109. [platform_adhesion]
  110. prime_blob_enable
  111. adhesion_type
  112. adhesion_extruder_nr
  113. skirt_line_count
  114. brim_width
  115. brim_line_count
  116. brim_location
  117. [dual]
  118. prime_tower_enable
  119. prime_tower_mode
  120. prime_tower_position_x
  121. prime_tower_position_y
  122. prime_tower_brim_enable
  123. [meshfix]
  124. [blackmagic]
  125. print_sequence
  126. user_defined_print_order_enabled
  127. magic_mesh_surface_mode
  128. magic_spiralize
  129. smooth_spiralized_contours
  130. [experimental]
  131. interlocking_enable
  132. conical_overhang_enabled
  133. support_conical_enabled
  134. adaptive_layer_height_enabled