anycubic_kobra_abs.inst.cfg 1.0 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647
  1. [general]
  2. definition = anycubic_kobra
  3. name = Suggested parameters for ABS_V1.0
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = abs
  8. setting_version = 22
  9. type = quality
  10. weight = 0
  11. [values]
  12. acceleration_enabled = True
  13. acceleration_print = 800
  14. acceleration_travel = 3000
  15. acceleration_travel_layer_0 = 3000.0
  16. bottom_layers = 6
  17. brim_width = 7.0
  18. default_material_bed_temperature = 80
  19. default_material_print_temperature = 230
  20. infill_overlap = 15
  21. infill_sparse_density = 20
  22. initial_layer_line_width_factor = 140
  23. inset_direction = outside_in
  24. jerk_enabled = True
  25. jerk_print = 8
  26. jerk_travel = 10
  27. layer_height = 0.2
  28. layer_height_0 = 0.2
  29. material_final_print_temperature = 230
  30. material_flow = 100
  31. material_flow_layer_0 = 120
  32. material_initial_print_temperature = 230
  33. optimize_wall_printing_order = True
  34. retraction_amount = 6
  35. retraction_min_travel = =line_width * 2
  36. retraction_speed = 40
  37. skirt_brim_speed = 40
  38. speed_print = 50
  39. speed_travel = 100
  40. top_bottom_thickness = 1.2
  41. wall_thickness = 1.2
  42. z_seam_type = sharpest_corner
  43. z_seam_x = 110
  44. z_seam_y = 220