elegoo_neptune_2D.def.json 3.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374
  1. {
  2. "version": 2,
  3. "name": "Neptune 2D",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Toylerrr",
  9. "manufacturer": "Elegoo",
  10. "file_formats": "text/x-gcode",
  11. "platform": "elegoo_neptune_2.stl",
  12. "has_machine_quality": true,
  13. "machine_extruder_trains":
  14. {
  15. "0": "elegoo_neptune2D_extruder_0",
  16. "1": "elegoo_neptune2D_extruder_1"
  17. },
  18. "platform_offset": [
  19. 0,
  20. 0,
  21. 0
  22. ],
  23. "preferred_quality_type": "normal"
  24. },
  25. "overrides":
  26. {
  27. "adhesion_type": { "default_value": "skirt" },
  28. "brim_width": { "default_value": 5 },
  29. "gantry_height": { "value": 30 },
  30. "machine_always_write_active_tool": { "default_value": true },
  31. "machine_depth": { "default_value": 235 },
  32. "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-80 Z0.2 F1600 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
  33. "machine_extruder_count": { "default_value": 2 },
  34. "machine_extruders_share_heater": { "default_value": true },
  35. "machine_extruders_share_nozzle": { "default_value": true },
  36. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  37. "machine_head_with_fans_polygon":
  38. {
  39. "value": [
  40. [-30, 35],
  41. [-30, -10],
  42. [25, 35],
  43. [25, -10]
  44. ]
  45. },
  46. "machine_heated_bed": { "default_value": true },
  47. "machine_height": { "default_value": 260 },
  48. "machine_name": { "default_value": "ELEGOO Neptune 2D" },
  49. "machine_start_gcode": { "default_value": ";simage\n;gimage\nG28 ;home\n;G29 ;Run ABL\n;M420 S1 ;Enable ABL mesh\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X2.0 Y20 Z0.28 F5000.0 ;Move to start position\nG1 E90 F1200 ;Load filament\nG92 E0 ;Reset Extruder\nG1 X2.0 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X2.3 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X2.3 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
  50. "machine_width": { "default_value": 235 },
  51. "material_diameter": { "default_value": 1.75 },
  52. "material_standby_temperature":
  53. {
  54. "default_value": 200,
  55. "settable_per_extruder": false
  56. },
  57. "prime_blob_enable": { "default_value": false },
  58. "prime_tower_enable": { "default_value": true },
  59. "prime_tower_min_volume": { "default_value": 90 },
  60. "prime_tower_size": { "default_value": 30 },
  61. "raft_airgap": { "default_value": 0.25 },
  62. "raft_margin": { "default_value": 5 },
  63. "retraction_amount": { "default_value": 5 },
  64. "retraction_enable": { "default_value": true },
  65. "retraction_speed": { "default_value": 70 },
  66. "skin_angles":
  67. {
  68. "default_value": [45, 135]
  69. },
  70. "speed_print": { "value": 60.0 },
  71. "z_seam_corner": { "default_value": "z_seam_corner_weighted" },
  72. "z_seam_type": { "default_value": "back" }
  73. }
  74. }