fusion3_0.6_PLA_low.inst.cfg 843 B

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. [general]
  2. definition = fusion3
  3. name = Low Quality
  4. version = 4
  5. [metadata]
  6. material = generic_pla
  7. quality_type = low
  8. setting_version = 22
  9. type = quality
  10. variant = 0.6mm Nozzle
  11. [values]
  12. adhesion_type = skirt
  13. cool_fan_enabled = True
  14. cool_fan_full_at_height = 0.8
  15. cool_fan_speed = 100
  16. cool_fan_speed_min = 15
  17. cool_min_layer_time = 5
  18. cool_min_layer_time_fan_speed_max = 65
  19. infill_overlap = 20
  20. infill_sparse_density = 30
  21. inset_direction = outside_in
  22. layer_height_0 = 0.35
  23. line_width = 0.65
  24. material_bed_temperature = 55
  25. material_flow = 96
  26. material_flow_layer_0 = 96
  27. material_print_temperature = 240
  28. retract_at_layer_change = False
  29. retraction_amount = 4.2
  30. retraction_speed = 100
  31. skirt_gap = 5
  32. speed_infill = 75
  33. speed_print = 125
  34. speed_travel = 150
  35. speed_travel_layer_0 = 100
  36. top_bottom_thickness = 1.0
  37. wall_thickness = 1.3
  38. xy_offset_layer_0 = -0.2