fusion3_0.4_ABS_fine.inst.cfg 893 B

123456789101112131415161718192021222324252627282930313233343536373839404142
  1. [general]
  2. definition = fusion3
  3. name = Fine Quality
  4. version = 4
  5. [metadata]
  6. material = generic_abs
  7. quality_type = fine
  8. setting_version = 22
  9. type = quality
  10. variant = 0.4mm Nozzle
  11. [values]
  12. adhesion_type = brim
  13. cool_fan_enabled = True
  14. cool_fan_full_layer = 70
  15. cool_fan_speed = 65
  16. cool_fan_speed_min = 15
  17. cool_min_layer_time = 3
  18. cool_min_layer_time_fan_speed_max = 60
  19. infill_sparse_density = 75
  20. inset_direction = outside_in
  21. layer_height = 0.1
  22. layer_height_0 = 0.25
  23. line_width = 0.4
  24. material_bed_temperature = 110
  25. material_flow = 98
  26. material_print_temperature = 255.0
  27. retract_at_layer_change = False
  28. retraction_amount = 2.25
  29. retraction_combing = noskin
  30. retraction_combing_max_distance = 10
  31. retraction_speed = 55
  32. speed_print = 35
  33. speed_travel_layer_0 = 100
  34. support_angle = 45
  35. support_enable = True
  36. support_infill_rate = 25
  37. top_bottom_thickness = 0.55
  38. wall_thickness = 0.9
  39. zig_zaggify_infill = True